Name: FD-G50 Keyence Clamp-On Gas Flow Meter | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

FD-G50

Pipe size

1 1/2", 1 1/4", 2.4 to 5.7 mm 0.09" to 0.22", 2", 32 A, 40 A, 50 A, ø41 to 45 mm 1.61" to 1.77", ø47 to 51 mm 1.85" to 2.01", ø58 to 62 mm 2.28" to 2.44"

Supported pipe materials

Iron, stainless steel, steel

Supported fluids

Air, Nitrogen, other gases*1

Fluid temperature

0 to 60ºC 32 to 140 °F

Recommended pressure

0.4 MPa or greater (58 PSI or greater)

Rated velocity of flow range

Up to 15 m/s

Actual flow rate range (typical)

Pipe size 32 A: 32.00Pipe size 40 A: 42.00Pipe size 50 A: 70.00, Pipe size 32 A: 54.00Pipe size 40 A: 72.00Pipe size 50 A: 120.00, Pipe size 32 A: 900.0Pipe size 40 A: 1200.0Pipe size 50 A: 2000.0

Standard flow rate range (typical) [CFM]

Pipe size 32 A: 151.58Pipe size 40 A: 198.95Pipe size 50 A: 331.58, Pipe size 32 A: 192.17Pipe size 40 A: 252.22Pipe size 50 A: 420.37, Pipe size 32 A: 232.76Pipe size 40 A: 305.49Pipe size 50 A: 509.16, Pipe size 32 A: 273.35Pipe size 40 A: 358.77Pipe size 50 A: 597.95

Display

QVGA 2.2" LCD color monitor

Display update cycle

Approx. 3 Hz

Display Resolution

0.01 CFM, 0.01 m3, 0.01 m3/h, 0.1 CF, 0.1 L/min, 1 L

Response Time

1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)

Measurement accuracy

±1.0% of F.S.*2*3*4*5, ±2.0% of RD*2*3*4*5

Zero point error

±0.15% of F.S.*2*6

Static leakage repeatability

±1.0% of RD*4*7

Hysteresis

Variable

Flow units

CFM, CFM(S), L/min, L/min (N), L/min (S), m3/h, m3/h (N), m3/h (S)

I/O wiring connection port

M12 4-pin connector (male)

Detection mode (switchable)

Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)*8, Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input*8

Standard I/O (switchable)

4 to 20 mA/0 to 20 mA, input time: 20 ms or more, load resistance: 500 Ω or less, max. 100 mA/ch, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less

Protection Circuit

Power supply reverse connection protection, power supply surge protection, Short-circuit protection for each output, Surge protection for each output

Analog input (for volume conversion)

analog current input (4 to 20 mA), input resistance: 100Ω or less, M8 4-pin connector (female)

Power supplied to pressure sensor

Supply current:70 mA or less (analog output of the pressure sensor included), Supply voltage: Equivalent to voltage applied to the FD-G

Communication interface

100 Mbps, Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable, D-code), IEEE 802.3u (100BASE-TX), M12 connector (female, USB 2.0

Network function

EtherNet/IP™, IO-Link*9, Modbus TCP

Recording capacity

100, Approx. 5 years

Power supply

class 2, 20 to 30 VDC including 10% ripple (P-P), 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 290 mA or less at 24 V, 350 mA or less at 20 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded), 490 mA or less at 24 V, 550 mA or less at 20 V

Environmental resistance

10 to 500 Hz, 100 m/s2, 1000 times for each axis, 16 ms pulse, 5 to 85%RH (no condensation), Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing), IP65/67 (IEC 60529)*10, power spectral density: 0.816 G2/Hz, XYZ axes

material

Body: PBT + coating, Body: PPS/SUS304, display: PMMA, Ethernet port: zinc nickel plating, Power supply port: SUS304-equivalent, rear surface: rubber, SUS304

Weight

Approx. 2.7 kg

Brand

Keyence

Description

Product Description: Keyence Clamp-On Gas Flow Meter

Enhance Efficiency: The Keyence Clamp-On Gas Flow Meter offers precise measurements for fluid temperature and flow rate, ensuring optimal performance within a wide range of industrial applications.

Boost Accuracy: With a measurement accuracy of up to ±2.0% of RD* and an extensive flow rate range, users can rely on this meter for consistent and reliable data to streamline operations.