Uncategorized

FW-V20

NPN

24 VDC, ripple (P-P): 10% or less

1370 mW (57 mA) or less*1, 1680 mW (70 mA) or less*1, 2330 mW (97 mA) or less*1, 2640 mW (110 mA) or less*1

display update cycle: 10 times/sec. (5 times/sec. when averaging the display), Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", green), red; lower characters: 5.7 mm 0.22"

green LED × 2 (display channel indicators), Red LED × 2 (corresponding to control output 1 and control output 2)

0.5, 1, 10 s selectable (When the FW-H10R is connected, 2, 5, and 10 s.), Off, this is selectable between off

FW-V20P

PNP

24 VDC, ripple (P-P): 10% or less

1370 mW (57 mA) or less*1, 1680 mW (70 mA) or less*1, 2330 mW (97 mA) or less*1, 2640 mW (110 mA) or less*1

display update cycle: 10 times/sec. (5 times/sec. when averaging the display), Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", green), red; lower characters: 5.7 mm 0.22"

green LED × 2 (display channel indicators), Red LED × 2 (corresponding to control output 1 and control output 2)

0.5, 1, 10 s selectable (When the FW-H10R is connected, 2, 5, and 10 s.), Off, this is selectable between off

FW-V25

NPN

24 VDC, ripple (P-P): 10% or less

1370 mW (57 mA) or less*1, 1680 mW (70 mA) or less*1, 2330 mW (97 mA) or less*1, 2640 mW (110 mA) or less*1

display update cycle: 10 times/sec. (5 times/sec. when averaging the display), Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", green), red; lower characters: 5.7 mm 0.22"

green LED × 2 (display channel indicators), Red LED × 2 (corresponding to control output 1 and control output 2)

0.5, 1, 10 s selectable (When the FW-H10R is connected, 2, 5, and 10 s.), Off, this is selectable between off

FW-V25P

PNP

24 VDC, ripple (P-P): 10% or less

1370 mW (57 mA) or less*1, 1680 mW (70 mA) or less*1, 2330 mW (97 mA) or less*1, 2640 mW (110 mA) or less*1

display update cycle: 10 times/sec. (5 times/sec. when averaging the display), Dual row display with signed 3-digit 7-segment LED (character height: upper characters: 8 mm 0.32", green), red; lower characters: 5.7 mm 0.22"

green LED × 2 (display channel indicators), Red LED × 2 (corresponding to control output 1 and control output 2)

0.5, 1, 10 s selectable (When the FW-H10R is connected, 2, 5, and 10 s.), Off, this is selectable between off

FW-H02

standard type

50 to 200 mm 2.0" to 7.9"*1

250 ms

0.25% of F.S./°C *2*3

Operation indicator (orange) x1 (Turns on when the power is turned on.)

Length= 63.5 mm 2.50", M18 x P1

FW-H07

standard type

150 to 700 mm 5.9" to 27.6"*1

300 ms

0.25% of F.S./°C *2*3

Operation indicator (orange) x1 (Turns on when the power is turned on.)

Length= 63.5 mm 2.50", M18 x P1

FW-H10R

Long range

150 to 1000 mm 5.9" to 39.4"*1

000 ms, 1

0.06% of F.S./°C*2

Operation indicator (orange) x1 (Turns on when the target is within the detecting range.)

M18 x P1, Length= 104 mm 4.09"

OP-51475

Connector Cable

10 m 32.81'

For head-amplifier connection

Keyence

OP-51494

Sensor head cable for Extension

4

0.18 mm2, 0.56 mm, 37 line/0.08 mm, Tinned annealed copper wire

0.22 mm, 1.0 mm, blue, brown, cross-linked polyethylene, gray, more than 0.20 mm, orange

0.55 mm, black, heat and oil resistant vinyl, more than 0.50 mm

3.6±0.15 mm

OP-51691

L-shaped relay connector

Y, -25 to +70 °C -13 to +158 °F (No freezing), 10 to 55 Hz, 2 hours each in the X, and Z axis, double amplitude: 1.5 mm 0.06"

Approx. 70 g

Keyence

OP-94736

Connector cable with M12 on the both edges for connection.

For extension of standard cables of connector sensors FD-P and FW.

M12 straight connector – M12 straight connector

0.5 m 0.64'

Keyence

OP-94737

Connector cable with M12 on the both edges for connection.

For extension of standard cables of connector sensors FD-P and FW.

M12 straight connector – M12 straight connector

1 m 3.28'

Keyence

FW-B01

Standard Mounting Bracket

FW Series

PPS

Keyence

FW-B02

Straight Mounting Bracket

FW Series

PPS

Keyence

FW-LG01*1

6 VDC (button battery LR43 x 4)

Blue LED (wavelength: 470 nm)

Y, 0 to +45 °C 32 to 113 °F (No freezing), 10 to 55 Hz, 2 hours in each of the X, and Z axis, Double amplitude 1.5 mm 0.06"

Main unit: ABS; Keycap: Silicon rubber

instruction manualBatteries are loaded to the casing., Test button batteries (LR43): 4

Approx. 21 g (Including batteries)

FW-SV01

FW-H02, FW-H07, FW-H10R

150 to 630 mm5.9" to 24.8" (FW-H07), 150 to 900 mm5.9" to 35.4" (FW-H10R)*1, 50 to 180 mm2.0" to 7.1" (FW-H02)

Y, -25 to +70 °C -13 to 158 °F (No freezing), 10 to 55 Hz, 2 hours in each of the X, 35 to 85 % RH (No condensation), and Z axis, Double amplitude 1.5 mm 0.06"

PPS

M18 nut: 1, Wave washer: 1

Approx. 15 g

OP-42367

Head connection connectors

AP-V80 head, FD-V40 head, FD-V70 head, FT, FW, Pneumatic separate amplifier type AP head

2 pcs.

Not reusable

Keyence

OP-51476

Front protection cover/panel mounting bracket

AP-V85(P)/V87(P), FD-V45A(P)/V75A(P), FT-55A(P), FW-V25(P)

Keyence