Name: SV2-005L2 Keyence AC Servo Systems | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

SV2-005L2

General specifications

-20 to +85°C -4 to +185°F (no freezing), -5 to +60°C 23 to 140°F (no freezing; reduced ratings at +55°C 131°F or more), 1 MΩ or more with insulation resistance tester, 1500 VAC or more (between primary side and ground)3000 VAC or more (between primary side and secondary side)350 VAC: Between secondary circuit and ground, 19.6 m/s2 64.3'/s2 ( JIS C60068-2-27 compliant), 2000 m 6561.7' or less above sea level (usable at reduced ratings at 1000 m 3280.8' or more), 22-bit serial encoder (absolute) communication, 3-phase (or single phase) 200 to 240 VAC +10 to -15%, 4.9 m/s2 16.1'/s2 (JIS C60068-2-6 compliant), 50 W, 50/60 Hz270 to 324 VDC *1, 500 VDC, 8 ms (max.), 95% RH or less (no condensation), analog feedback, Approx. 0.8 kg, Attached to base mount, CSA22.2 No.274, EDM: Built-in safety circuit status monitoring (fixed output)Max. allowable voltage: 30 VDCMax. allowable current: 50 mA DCMax. voltage drop at ON: 1.5 VMax. delay time: 8 ms(Time from changing STO1, EN ISO13849-1: 2008, EN50178, EN55011 Class A, EN60204-1, EN61000-6-2, EN61000-6-4, EN61326-3-1, EN61508, EN61800-3, EN61800-5-1, EN61800-5-2, EN62061, etc., FCC Part15 B, fully closed control serial communication, ICES-003. Class A, IGBT, III, IP20, magnetic fields, No more than ±5%, No static electricity noise, oil, or chemicals• No dust present, or radiation present, Overcurrent, overload, overvoltage, PLe (Category3) / EN ISO13849-1: 2008, Pollution degree: 2 (in an IP54 or higher control panel)However, PWM control, regenerative abnormalities, SIL CL 3/EN62061, SIL3/EN61508, sine-wave current driving method, Single-phase 200 to 240 VAC +10 to -15%, STO function (STO/EN61800-5-2), STO1, STO2 off until motor current cutoff), STO2 until EDM change), STO2: Base block signal for power moduleInternal impedance: 4.7 kΩOperable voltage range: +24 V ±20%Max. delay time: 8 ms(Time from turning STO1, strong electric fields, Three-phase full-wave rectification, UL61800-5-1, undervoltage, usage under the following requirements required:• No corrosive gas or flammable gas present• No exposure to water

Power supply/current capacity and power loss

—, 0.2 Arms, 0.66 Arms, 17 W, 2.1 Arms, 22.1 W, 34 A, 5.1 W, 50 W, Single phase 200 V: 0.2 kVA, Single phase 200 V: 0.8 Arms, Three-phase 200 V: 0.2 kVA, Three-phase 200 V: 0.4 Arms, Three-phase 200 V/Single phase 200 V

Performance specifications

±0.01% or less with load fluctuations of 0 to 100% (at rated rotation speed), ±0.1% or less with ambient temperatures of 0 to +50°C 32 to 122°F (at rated rotation speed), ±1%, 0% with ±10% of rated voltage (at rated rotation speed), 1:5000 (load torque ≤ rated torque conditions), 2.6 kHz, 7-segment LEDRotary switch ×2 (16 ch)Slide switch ×1 (4 ch), alarm history, Built-in regenerative resistor: 50 W to 400 W … not installed750 W to 5.0 kW … installedExternal regenerative resistor: OP-84399 (50 W to 1.0 kW)OP-87073 (1.5 kW *2), CHARGE: For notification of main circuit power supply input (orange)POWER: For notification of control circuit power supply input (green)CONNECT: For notification of connection (green)LINK1, etc., forced stop detection (FSTOP), Gain control, limit switch detection (LSP/LSN), LINK2: For notification of MECHATROLINK communication (green), Operated at main circuit power supply OFF, servo alarm, Z-phase search

I/O specifications

±1% of F.S., ±10 bits, ±10 mA, ±10 V (linearity valid range ±8 V), ±12 V, ±20 mV (typ.), 0.1 mA, 1 ms, 1.2 ms (typ.), 1.5 VDC or less, 1.6 Mbps (with 2-phase, 10 ms, 16 bits, 19 VDC, 2 ch, 2.5 ms, 24 VDC, 250 μs, 28.8 VDC, 30 kΩ, 30 VDC / 50 mA, 4, 4 general input), 4 times multiplication, 5 ms, 500 μs, 6.4 MHz or equivalent) *3, 7 (3 high-speed input, 7 points/1 common point (1 terminal) (bidirectional), Approx. 4.7 kΩ, electromagnetic brake timing (BRAKE), EXT2, EXT3), external latch signals 1 to 3 (EXT1, forward limit switch (LSP), forward torque limit selection (PTL), Full signal assignment, general input: 0.3 mA, general input: 3.7 mA, High-speed input: 0.6 mA, High-speed input: 4.5 mA, in position (INPOS), Independent common, Individual signal assignment excluding ALARM signal, logic-settable alarm (ALARM), logic-settable forced stop (FSTOP), operation preparation complete (RDY), origin return deceleration switch (DEC), Phase A (A+/A−), phase B(B+/B−), phase Z (Z+/Z−): Differential line-driver output, Positioning proximity (NEAR), reverse limit switch (LSN), reverse torque limit selection (NTL), SN75ALS174 (T.I.) or equivalent, speed limiting (VLM), speed matching (VCMP), torque limiting (TLM), Transistor NPN output, warning (WARN), zero speed detection (ZSP)

Communication specifications

03H to EFH (Max. number of connectable slaves: 62), 1 to 4 ms (in multiples of 0.5 ms), 100 Mbps, 125 μs, 250 μs, 32 bytes/station, 48 bytes/station (selectable with slide switch), 50 m 164.0' *4, 500 μs, 750 μs, adjustment, Category 5e-compliant, etc., etc.), MECHATROLINK-III, MECHATROLINK-III command(sequence, monitor, motion, parameter setting, PC, Position control / speed control / torque control, Status display, STP cross cable, Support for values starting at transmission frequency × 1, tuning, USB 2.0-compliant

Brand

Keyence

Description

Enhance Your Operations with Keyence AC Servo Systems

Boost Efficiency: The Keyence SV2-005L2 AC Servo Systems deliver reliable power supply, precise current capacity, and minimal power loss, ensuring smooth operations and increased productivity. With a user-friendly control interface and advanced performance specifications, these systems optimize your processes with ease.

Ensure Safety: Featuring built-in safety circuits, the SV2-005L2 systems offer secure monitoring and protection against overcurrent, overvoltage, and other abnormalities. Enjoy peace of mind knowing that your equipment is safeguarded, enabling uninterrupted workflow and preventing unexpected downtime.

Maximize Control: Utilize the MECHATROLINK-III communication system for seamless command execution, precise positioning control, and efficient speed and torque regulation. With robust design and high-speed inputs, these servo systems empower you to achieve accurate results and maintain operational control.