Micro PLC / Small PLC

KV-N14AR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Nonvolatile RAM*7, Output common: 4 points, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, R500 to R505 (6 points), Relay

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

76 VA

KV-N14AT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity : 0.6 A), 5 to 95%RH (no condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axes, 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 1 point, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R505 (2 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

75 VA (* The VA values are calculated with a power factor of 30%.)

KV-N14ATP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity : 0.6 A), 5 to 95%RH (no condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axes, 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 1 point, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R505 (2 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

75 VA (* The VA values are calculated with a power factor of 30%.)

KV-N14DR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Nonvolatile RAM*7, Output common: 4 points, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, R500 to R505 (6 points), Relay

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

160 mA

KV-N14DT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, ―, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95%RH (no condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axes, 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 1 point, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R505 (2 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

150 mA

KV-N14DTP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, ―, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95%RH (no condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

and other problems, CPU error, mnemonic, RAM error, 10000When a maximum-length ladder program is written with no labels., 12 points 32 bit (Z01 to Z12), 128 (excluding the base unit I/O), 14000When a maximum-length ladder program is written with no device comments., 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axes, 2 points (CTH0 to CTH1), 256 points 32 bit (C0 to C255), 3, 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 8 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 1 point, output: 6 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003 (4 points), General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R505 (2 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

150 mA

KV-N24AR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 points (CTH0 to CTH1), 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 14 points, KV Script, Nonvolatile RAM*7, Output common: 5 points, output: 10 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points), When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R509 (10 points)

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

79 VA

KV-N24AT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axesMaximum output frequency: 100 kHz, 2 points (CTH0 to CTH1)32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input: 14 points, KV Script, Nonvolatile RAM*7, output: 10 pointsInput common: 1 pointOutput common: 1 point, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal)High-speed A-phase and B-phase input: Shared common for all points (shared with general input), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points)High-speed A-phase and B-phase input: R004 to R007 (2 channels, When the HSP instruction is used: 10 µsWhen CR2305 is turned ON: 10 µs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R509 (6 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

76 VA (* The VA values are calculated with a power factor of 30%.)

KV-N24ATP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axesMaximum output frequency: 100 kHz, 2 points (CTH0 to CTH1)32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input: 14 points, KV Script, Nonvolatile RAM*7, output: 10 pointsInput common: 1 pointOutput common: 1 point, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal)High-speed A-phase and B-phase input: Shared common for all points (shared with general input), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points)High-speed A-phase and B-phase input: R004 to R007 (2 channels, When the HSP instruction is used: 10 µsWhen CR2305 is turned ON: 10 µs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R509 (6 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

76 VA (* The VA values are calculated with a power factor of 30%.)

KV-N24DR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 points (CTH0 to CTH1), 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 14 points, KV Script, Nonvolatile RAM*7, Output common: 5 points, output: 10 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points), When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R509 (10 points)

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

190 mA

KV-N24DT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axesMaximum output frequency: 100 kHz, 2 points (CTH0 to CTH1)32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input: 14 points, KV Script, Nonvolatile RAM*7, output: 10 pointsInput common: 1 pointOutput common: 1 point, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal)High-speed A-phase and B-phase input: Shared common for all points (shared with general input), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points)High-speed A-phase and B-phase input: R004 to R007 (2 channels, When the HSP instruction is used: 10 µsWhen CR2305 is turned ON: 10 µs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R509 (6 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

160 mA

KV-N24DTP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1*2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 axesMaximum output frequency: 100 kHz, 2 points (CTH0 to CTH1)32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input: 14 points, KV Script, Nonvolatile RAM*7, output: 10 pointsInput common: 1 pointOutput common: 1 point, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal)High-speed A-phase and B-phase input: Shared common for all points (shared with general input), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), Input time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter 90 to 93 μsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points)High-speed A-phase and B-phase input: R004 to R007 (2 channels, When the HSP instruction is used: 10 µsWhen CR2305 is turned ON: 10 µs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R504 to R509 (6 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R503 (4 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

160 mA

KV-N40AR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Nonvolatile RAM*7, Output common: 6 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R008 to R013 (3 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points), When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R515 (16 points)

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

86 VA

KV-N40AT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 axes, 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 2 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points)High-speed A-phase and B-phase input: R008 to R013 (3 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R506 to R515 (10 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R505 (6 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

82 VA

KV-N40ATP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 axes, 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 2 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points)High-speed A-phase and B-phase input: R008 to R013 (3 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R506 to R515 (10 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R505 (6 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

82 VA

KV-N40DR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Nonvolatile RAM*7, Output common: 6 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R008 to R013 (3 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points), When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R515 (16 points)

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

280 mA

KV-N40DT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 axes, 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 2 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points)High-speed A-phase and B-phase input: R008 to R013 (3 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R506 to R515 (10 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R505 (6 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

250 mA

KV-N40DTP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 axes, 3 points (CTH0 to CTH2), 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 6 points (CTC0 to CTC5), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 24 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 2 points, output: 16 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 6 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R007, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R014 to R107 (18 points)High-speed A-phase and B-phase input: R008 to R013 (3 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R506 to R515 (10 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R505 (6 points), MOSFET *10, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*11

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

250 mA

KV-N60AR

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTH0 to CTH3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8 points (CTC0 to CTC7), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 36 points, KV Script, Nonvolatile RAM*7, Output common: 8 points, output: 24 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 8 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*10, General input (R108 to R203):OFF to ON: Max. 50 µs (Typ. 7 µs), General input: All points/1 common (1 terminal), General input: R000 to R007, High-speed A-phase and B-phase input: 6.5 mA*9), High-speed A-phase and B-phase input: R008 to R015 (4 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 150 µs (Typ. 70 µs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs)*10, phase difference: 50 kHz, R100 to R203 (28 points)*8, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R607 (24 points)

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

91 VA

KV-N60AT

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 axes, 4 points (CTH0 to CTH3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8 points (CTC0 to CTC7), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 36 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 3 points, output: 24 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 8 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*10, General input (R108 to R203):OFF to ON: Max. 50 µs (Typ. 7 µs), General input: All points/1 common (1 terminal), General input: R000 to R007, High-speed A-phase and B-phase input: 6.5 mA*9), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 150 µs (Typ. 70 µs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs)*10, phase difference: 50 kHz, R100 to R203 (28 points)*8High-speed A-phase and B-phase input: R008 to R015 (4 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R508 to R607 (16 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R507 (8 points), MOSFET *11, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*12

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

85 VA

KV-N60ATP

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 16k steps, 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 axes, 4 points (CTH0 to CTH3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8 points (CTC0 to CTC7), 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 36 points, KV Script, Maximum output frequency: 100 kHz, Nonvolatile RAM*7, Output common: 3 points, output: 24 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 8 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*10, General input (R108 to R203):OFF to ON: Max. 50 µs (Typ. 7 µs), General input: All points/1 common (1 terminal), General input: R000 to R007, High-speed A-phase and B-phase input: 6.5 mA*9), High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 150 µs (Typ. 70 µs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), ON to OFF: Max. 2 μs (Typ. 0.3 μs)*10, phase difference: 50 kHz, R100 to R203 (28 points)*8High-speed A-phase and B-phase input: R008 to R015 (4 channels, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.5 A, 0.6 VDC or less (with 0.3 A output), 0.8 VDC or less (with 0.5 A output), 100 μA or less, 30 VDC, 8 to 10 points/1 common, General output: R508 to R607 (16 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R507 (8 points), MOSFET *11, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (7 to 100 mA load), ON to OFF: 5 μs (7 to 100 mA load), Protection provided for each common*12

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

85 VA

KV-NC32T

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1, 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (+10%/-15%), 5 to 95% RH (no condensation), 50 MΩ or more(500 VDC megger used to perform measurements between power supply terminal and input terminals, 50 ns (based on noise simulator)Conforms to IEC standards (IEC61000-4-2/3/4/6), Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*2, Acceleration: 9.8 m/s2 32.2'/s2*2, Amplitude: 1.75 mm 0.07"*2, Amplitude: 3.5 mm 0.14"*2, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case(1000 VAC for 1 minute, between power supply terminal and output terminals for the transistor output type expansion I/O unit), I, pulse duration 1 μs, three times in each of the X

8, and other problems, CPU error, mnemonic, RAM error, ±60 seconds/month (at 25°C 77°F), 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 20000When a maximum-length ladder program is written with no labels., 256, 256 points 32 bits (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 3 axesMaximum output frequency: 100 kHz, 3 points (CTH0 to CTH2)32-bit automatic reset counter*3(Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 32k steps, 50 kHz per phase difference)*4, 512 points 16 bit (TM0 to TM511), 512 points 32 bits (T0 to T511), 6 points (CTC0 to CTC5)32 bits, 8192 points 1 bit (B0 to B1FFF), 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructionsCalculation instruction: 123 types and 311 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructionsTotal: 335 types and 690 instructions, Flash ROM can be rewritten 10000 times, Input: 16 pointsoutput: 16 pointsInput common: 1 pointOutput common: 1 point, KV Script, Nonvolatile RAM*5, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), two points per high-speed counter

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, All points/1 common (1 terminal), Delay by input time constantInput time constant setting 10 μs: Digital filter 1.6 to 2 μsInput time constant setting 20 μs: Digital filter 9 to 12 μsInput time constant setting 110 μs: Digital filter, Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*7, General input: OFF to ON: Max. 30 μs (Typ. 3.5 μs), General input: R000 to R009 (10 points), High-speed A-phase and B-phase input: 6.5 mA*6), High-speed A-phase and B-phase input: R010 to R015 (6 points), Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*7, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input: OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

0.6 VDC or less, 100 μA or less, 16 points/1 common, 30 VDC, 30 VDCGeneral output: 0.2 A (1.6 A/common), General output: R506 to R515 (10 points), General output:OFF to ON: 100 μs (load of 1 mA or more), High-speed output: 0.3 A (1.6 A/common), High-speed output: 100 kHz (7 to 100 mA load), High-speed output: R500 to R505 (6 points), MOSFET (N-ch) output, ON to OFF: 200 μs (load of 1 mA or more)High-speed output:OFF to ON: 2 μs (load of 7 mA or more), ON to OFF: 5 μs (load of 7 mA or more), Protection provided for each common*8

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RS-232C, Common between SD/RDSD: (green)RD: (red)The color may appear as orange during transmission.

260 mA

KV-N10L

1, 15 m 49.2'

D-sub 9-pin, RS-232C

RD (orange), SD (orange)

Approx. 30 g

Keyence

KV-N11L

32*1, Extendable up to 1200 m 3937.0'*1

European terminal block (cannot be removed or reconnected), RS-422A/RS-485 (4-wire), RS-485 (2-wire)

RD (orange), SD (orange)

Approx. 30 g

Keyence

KV-NC10L

1, 15 m 49.2'

D-sub 9-pin, RS-232C

RD (orange), SD (orange)

Approx. 100 g

Keyence

KV-NC1EP

0.5 to 10000 ms (0.5 ms increments) Setting is possible for each connection.(Data is updated on the line at specified cycles, 3000 (pps)*3, 504 bytes or 1444 bytes*4, 6000 (pps)*3, 64*1, 8000 words, Conforming to CT10, Cyclic, Cyclic/Change Of State*2, independent of the number of nodes.), No. of connections: 64*6, No. of simultaneous messages: 32, No. of simultaneous messages: 96, Provided (IGMP client function)*5

21, 21 (can be set within the range between 1 and 65535), No. of sockets TCP: 0 UDP: 1 Port No.: 8502 (can be set within the range between 1 and 65535), No. of sockets TCP: 2 Port No.: 20, No. of sockets TCP: 4 Port No.: 20, No. of sockets TCP: 8 UDP: 0 Port No.: 8500 (can be set within the range between 1 and 65535) *7, No. of sockets TCP: Total: 15 UDP: 1 Port No.: 5000 (can be set within the range between 1 and 65535) *10*8*9, No. of sockets TCP: Total: 15 UDP: 1 Port No.: 8501 (can be set within the range between 1 and 65535) *8*9, No. of sockets TCP: Total: 320 UDP: 1 Port No.: 2222, No. of sockets TCP: Total: 320 UDP: 1 Port No.: 44818, No. of sockets UDP: 1 Port No.: 123, No. of sockets UDP: 1 Port No.: 5001 (can be set within the range between 1 and 65535), No. of sockets UDP: 1 Port No.: 53

90 mA or less

Approx. 110 g

Keyence

KV-NC20L

32, Extendable up to 1200 m 3937.0', Port1 : 15 m 49.2'Port2 : 15 m 49.2', Port1 : 1Port2 : 1

Port 1 : D-sub 9-pinPort 2 : European terminal block, Port 1 : RS-232CPort2 : RS-232C, RS-422A/RS-485 (4-wire), RS-485 (2-wire)

RD (orange), SD (orange)

Approx. 110 g

Keyence

OP-42143

CPU Direct Connection Cable

KV-D30

5 m 16.40'

Keyence

OP-87581

1 m 3.3'

2 cm 0.79"

Keyence

KV-10AR

AC power supply type base unit

100 to 240 VAC (± 10%)

Less than 40 ms

-20 to 70°C -4 to 158°F (no freezing), 0 to 45°C 32 to 113°F (KZ-P3), 0 to 50°C 32 to 122°F (no freezing), 1, 100mA or less, 150 m/s2 (15 G), 2 times in each of the 3 axial directions, 35 to 85% RH (No condensation), 50 MΩ or more (tested with a 500 VDC megger, 50 ns (by way of a noise simulator), 500 VAC for 1 minute (between the power supply terminal and the I/O terminals and between all the external terminals and the case), 500 Vp-p or more, Acceleration: 4.9 m/s2*1, Acceleration: 9.8 m/s2*1, Amplitude: 0.035 mm*1, Amplitude: 0.075 mm*1, Approx 250g, between the power supply terminal and the input terminal and between all the external terminals and the case), conforms to EN standards (EN 61000-4-2/-3/-4/-6), Conforms to JIS C 0041, KV-E16R: Approx 190 g, KV-E16T (P): Approx 130 g, KV-E16X: Approx 130 g, KV-E4R: Approx 100 g, KV-E4T: Approx 80 g, KV-E4X 20mA or less KV-E8X 25mA or less KV-E16X 35mA or less KV-E4T 25mA or lessKV-E8T (P) 40mA or less KV-E16T 60mA or less KV-E4R 40mA or less KV-E8R 70mA or lessKV-E16TP 70mA or less KV-E4XT (P) 30, KV-E4X: Approx 80 g, KV-E4XR: Approx 120 g, KV-E4XT (P): Approx 100 g, KV-E8R: Approx 130 g, KV-E8T (P): Approx 100 g, KV-E8X: Approx 100 g, KZ-P3 Approx 230g KV-D20 Approx 160g KL-N10V Approx 80g, Minimal amount of dust and corrosive gas present, operating time: 11 ms, Operator panel KV-D20: 60 mA or less KL link adapter KL-N10V: 35 mA or less Programming console KZ-P3: 65 mA or less, pulse width: 1 µs

Keyence