| Model |
MP-FN20
|
| Type |
Single model
|
| Connection bore diameter |
NPT1/2" (15A)
|
| Supported gases |
Air and non-corrosive gases
|
| Supported gas temperature |
-5 to +50°C, 23 to 122°F
|
| Operating pressure range |
0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi *1
|
| Pressure resistance |
1.5 MPa, 15 bar, 217.5 psi
|
| Flow rate |
±(1.5% of RD + 0.5% of F.S.) *2 *3, ±1.0% of F.S. (with an averaging time of 1.0 s), 150 ms (63% response) *4, Heat based (mass flow rate), OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable), 0.1 CFM, 0.1 m3/h 3.53 ft3/h, 0.2 m3/h 7.06 ft3/h, 1 L/min, 4 L/min, 4 to 2000 L/min0.2 to 120.0 m3/h 7.06 to 4237.76 ft3/h 0.1 to 70.6 CFM
|
| Pressure (Digital value, gauge pressure) |
±0.2% of F.S. (with a response time of 50 ms), ±2.0% of F.S., 0.0 to 145.0 psi, 0.00 to 10.00bar, 0.000 to 1.000 MPa, 0.001 MPa, 0.01 bar, 0.1 psi, 1.0 s, 100 ms, 50 ms, 500 ms, and 5.0 s *4, Selectable from 10 ms
|
| Humidity (Dew point) |
±4°C, ±7°F *5 *6, 1°F *5 *6, 15 to 100%RH (no condensation)/Corresponds to the relative humidity range *5 *6, 5%RH/1°C
|
| Temperature |
±2.0°C, ±3.6°F *7, 0.1°C, 0.1°F *7
|
| Shut-off valve |
1 s or less (closed → open), 50 mL/min 0.002 CFM (N) or less
|
| Filter/regulator (Standard model only) |
─
|
| Check valve |
Available
|
| Display |
Color LCD, status indicator
|
| Data accumulation |
Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks, USB 2.0/Ethernet
|
| I/O |
4 to 20 mA, input time: 20 ms or more, load resistance: 260 Ω or less *4, max. 100 mA/Ch., N.O./N.C. setting switchable, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less
|
| Protection Circuit |
overcurrent protection for each output, Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O
|
| Power supply |
1.2 A (300 ms) when opening/closing valve, 100 mA at all other times *8 (standalone usage; excluding load current), 24 VDC +25%/-20% (including ripple), Class 2 or LPS
|
| Communication interface |
USB2.0
|
| Network compatibility |
MC protocol/SLMP, Modbus/TCP, PROFINET, When using only this unit: IO-Link (Specification v1.1/COM3) *9When connecting MP-FEN1 : EtherNet/IP™
|
| Environmental resistance |
Y, −5°C to +50°C 23°F to 122°F (no freezing) *11, 10 times for each axis, 10 to 500 Hz; power spectral density: 0.204 G2/Hz; X, 300 m/s2, 35%RH to 85%RH (no condensation), and Z directions, IP67 (IEC60529) *10, XYZ axes
|
| material |
Sensor part : PET/PPS/PBT/POM/aluminum/SPHCFilter/regulator : Aluminum/POM/HDPE/NBR/Nylon *12
|
| Weight |
Approx. 1020 g 35.98 oz
|
| Brand |
Keyence
|
![Keyence MP-FN20 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/mp-fn20-industify-1.jpg "Keyence MP-FN20 [urunkategori] - industify.com")
![Keyence FD-HCC2 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-hcc2-industify-1.jpg)
![Keyence FD-H10 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h10-industify-1.jpg)
![Keyence FD-H20 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h20-industify-1.jpg)
![Keyence FD-H10K [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h10k-industify-1.jpg)
![Keyence FD-H20K [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h20k-industify-1.jpg)
![Keyence FD-H63F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h63f-industify-1.jpg)
Reviews
There are no reviews yet.