| Model |
MP-FG10R
|
| Type |
Standard model
|
| Connection bore diameter |
G3/8" (10 A)
|
| Supported gases |
Air and non-corrosive gases
|
| Supported gas temperature |
-5 to +50°C, 23 to 122°F
|
| Operating pressure range |
0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi *1
|
| Pressure resistance |
1.5 MPa, 15 bar, 217.5 psi
|
| Flow rate |
±(1.5% of RD + 0.5% of F.S.) *2 *3, ±1.0% of F.S. (with an averaging time of 1.0 s), 0.01 CFM, 0.01 m3/h 0.35 ft3/h, 0.07 CFM, 0.1 L/min, 0.12 m3/h 4.24 ft3/h, 150 ms (63% response) *4, 2.0 L/min, 2.0 to 1000.0 L/min0.12 to 60.00 m3/h 4.24 to 2118.88 ft3/h 0.07 to 35.31 CFM, Heat based (mass flow rate), OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable)
|
| Pressure (Digital value, gauge pressure) |
±0.2% of F.S. (with a response time of 50 ms), ±2.0% of F.S., 0.0 to 145.0 psi, 0.00 to 10.00bar, 0.000 to 1.000 MPa, 0.001 MPa, 0.01 bar, 0.1 psi, 1.0 s, 100 ms, 50 ms, 500 ms, and 5.0 s *4, Selectable from 10 ms
|
| Humidity (Dew point) |
±4°C, ±7°F *5 *6, 1°F *5 *6, 15 to 100%RH (no condensation)/Corresponds to the relative humidity range *5 *6, 5%RH/1°C
|
| Temperature |
±2.0°C, ±3.6°F *7, 0.1°C, 0.1°F *7
|
| Shut-off valve |
1 s or less (closed → open), 50 mL/min 0.002 CFM (N) or less
|
| Filter/regulator (Standard model only) |
0.15 to 0.90 MPa, 5 μm 0.196850 Mil, 60 cc
|
| Check valve |
Available
|
| Display |
Color LCD, status indicator
|
| Data accumulation |
Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks, USB 2.0/Ethernet
|
| I/O |
4 to 20 mA, input time: 20 ms or more, load resistance: 260 Ω or less *4, max. 100 mA/Ch., N.O./N.C. setting switchable, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less
|
| Protection Circuit |
overcurrent protection for each output, Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O
|
| Power supply |
1.2 A (300 ms) when opening/closing valve, 100 mA at all other times *8 (standalone usage; excluding load current), 24 VDC +25%/-20% (including ripple), Class 2 or LPS
|
| Communication interface |
USB2.0
|
| Network compatibility |
MC protocol/SLMP, Modbus/TCP, PROFINET, When using only this unit: IO-Link (Specification v1.1/COM3) *9When connecting MP-FEN1 : EtherNet/IP™
|
| Environmental resistance |
Y, −5°C to +50°C 23°F to 122°F (no freezing) *11, 10 times for each axis, 10 to 500 Hz; power spectral density: 0.204 G2/Hz; X, 300 m/s2, 35%RH to 85%RH (no condensation), and Z directions, IP67 (IEC60529) *10, XYZ axes
|
| material |
Sensor part : PET/PPS/PBT/POM/aluminum/SPHCFilter/regulator : Aluminum/POM/HDPE/NBR/Nylon *12
|
| Weight |
Approx. 1050 g 37.04 oz (excluding drainage cup)
|
| Brand |
Keyence
|
![Keyence MP-FG10R [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/mp-fg10r-industify-1.jpg "Keyence MP-FG10R [urunkategori] - industify.com")
![Keyence FI-C40F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-c40f-industify-1.jpg)
![Keyence FI-T25 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-t25-industify-1.jpg)
![Keyence FD-H63F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h63f-industify-1.jpg)
![Keyence FD-H20 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h20-industify-1.jpg)
![Keyence FD-HCC0 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-hcc0-industify-1.jpg)
![Keyence FI-1000 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-1000-industify-1.jpg)
Reviews
There are no reviews yet.