Name: KV-N24AR Keyence Programmable Logic Controller | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

KV-N24AR

General specifications

2, 2000 m 6561.7' or less, and Z directions, Application time: 11 ms, Y, −25 to +75°C −13 to +167°F, 0 to 55°C 32 to 131°F (no freezing)*1 *2, 100 to 240 VAC (+10%/-15%), 1500 V peak-to-peak or more, 1500 VAC for 1 minute, 24 VDC (±10%; output capacity: 0.6 A), 5 to 95% RH (No condensation)*1, 50 MΩ or more (500 VDC megger used to perform measurements between power terminal and input terminals, 50 ns (based on noise simulator), AC: II, Acceleration: 150 m/s2 492.1'/s2, Acceleration: 4.9 m/s2 16.1'/s2*3*4, Acceleration: 9.8 m/s2 32.2'/s2*3*4, Amplitude: 1.75 mm 0.07"*3*4, Amplitude: 3.5 mm 0.14"*3*4, and between all external terminals and case), As little dust and corrosive gas as possible, between power supply terminal and I/O terminals and between all external terminals and case, DC: I, IEC standard compliant (IEC61000-4-2/3/4/6), pulse duration 1 μs, three times in each of the X

Performance specifications

8, and other problems, CPU error, mnemonic, RAM error, 12 points 32 bit (Z01 to Z12), 1440 points 1 bit (CR000 to CR8915), 16384 points 16 bit (W0 to W3FFF), 2 points (CTH0 to CTH1), 20000When a maximum-length ladder program is written with no labels., 256 (excluding the base unit I/O), 256 points 32 bit (C0 to C255), 28000When a maximum-length ladder program is written with no device comments., 32 bits, 32-bit automatic reset counter*5 (Input response: 100 kHz per single phase, 3200 points 1 bit (LR000 to LR19915), 32768 points 16 bit (DM0 to DM32767), 4 points (CTC0 to CTC3), 50 kHz per phase difference)*6, 512 points 16 bit (TM0 to TM511), 512 points 32 bit (T0 to T511), 8192 points 1 bit (B0 to B1FFF), 8k steps, 9000 points 16 bit (CM0 to CM8999), 9600 points 1 bit (MR000 to MR59915), Application instruction: 170 ns minimum, Application instruction: 39 types and 56 instructions, Basic instruction: 50 ns minimum, Basic instruction: 81 types and 182 instructions, Calculation instruction: 123 types and 311 instructions, Expanded ladder, Expansion instruction: 92 types and 141 instructions, Flash ROM can be rewritten 10000 times, Input common: 1 point, Input: 14 points, KV Script, Nonvolatile RAM*7, Output common: 5 points, output: 10 points, Program storage method, Refresh method, Total of 9600 points 1 bit (R000 to R59915), Total: 335 types and 690 instructions, two points per high-speed counter

Input specifications

(High-speed A-phase and B-phase input) Single phase: 100 kHz, 1.5 mA, 19 VDC, 24 V ±10%, 24 VDC (General input: 5.3 mA, 24 VDC input (open collector), 26.4 VDC, 4 points in total), Duty 50%, eight-level switching is possible (set with CM1620). Can also be set from the Unit Editor.*9, General input: All points/1 common (1 terminal), General input: R000 to R003, General input:OFF to ON: Max. 30 μs (Typ. 3.5 μs), High-speed A-phase and B-phase input: 6.5 mA*8), High-speed A-phase and B-phase input: R004 to R007 (2 channels, High-speed A-phase and B-phase input: Shared common for all points (shared with general input), Input time constant setting 10 µs: Digital filter 1.6 to 2 µsInput time constant setting 20 µs: Digital filter 9 to 12 µsInput time constant setting 110 µs: Digital filter 90 to 93 µsInput time consta, Normal: 10 ms, ON to OFF: Max. 2 μs (Typ. 0.3 μs)*9, ON to OFF: Max. 50 μs (Typ. 15 μs)High-speed A-phase and B-phase input:OFF to ON: Max. 2 μs (Typ. 1.1 μs), phase difference: 50 kHz, R008 to R013 (10 points), When the HSP instruction is used: 10 μsWhen CR2305 is turned ON: 10 μs to 10 ms

Output specifications

10 ms or less, 100 μA/100 mVDC, 2 A, 2 to 4 points/1 common, 250 VAC/30 VDC, 50 mΩ or less, Electrical: 100000 cycles or more (20 cycles/minute), Impossible, Mechanical: 20000000 cycles or more, Relay, R500 to R509 (10 points)

Built-in serial port

1, 1 bit, 115200 bps, 1200, 15 m 49.2', 19200, 2 bits, 2400, 38400, 4800, 57600, 7 bits, 8 bits, 9600, Even, Full duplex, Modular connector, none, odd, RD (red), RS-232C, SD (green)

Internal current consumption

79 VA

Weight

Approx. 500 g

Brand

Keyence

Description

Keyence KV-N24AR Programmable Logic Controller

Enhance operational efficiency and streamline automation processes with the Keyence KV-N24AR Programmable Logic Controller. The advanced performance specifications ensure reliable operation in harsh industrial environments, offering peace of mind with compliance to IEC standards for electromagnetic noise resistance. With a wide input voltage range and robust output capacity, this PLC is versatile and adaptable to various applications.

Improved Precision: Benefit from precise control over inputs and outputs with high-speed processing capabilities, supporting complex automation tasks with ease.
Enhanced Durability: Designed to withstand challenging conditions, this PLC offers long-lasting performance, reducing maintenance and downtime for increased productivity.
Flexible Programming: Utilize a variety of instruction types and application-specific commands to customize operations, ensuring seamless integration within existing systems.