Name: FD-G80L Keyence Clamp-On Gas Flow Meter | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

FD-G80L

Pipe size

2 1/2", 2.0 to 4.0 mm 0.08" to 0.16", 3", 65 A, 80 A, ø72 to 78 mm 2.83" to 3.07", ø86 to 92 mm 3.39" to 3.62"

Supported pipe materials

Iron, stainless steel, steel

Supported fluids

Air, Nitrogen, other gases*1

Fluid temperature

0 to 60ºC 32 to 140 °F

Recommended pressure

0.4 MPa or greater (58 PSI or greater)

Rated velocity of flow range

Up to 15 m/s

Actual flow rate range (typical)

Pipe size 65 A: 120.00Pipe size 80 A: 160.00, Pipe size 65 A: 200.0Pipe size 80 A: 280.0, Pipe size 65 A: 3300Pipe size 80 A: 4600

Standard flow rate range (typical) [CFM]

Pipe size 65 A: 1025.05Pipe size 80 A: 1366.73, Pipe size 65 A: 568.43Pipe size 80 A: 757.91, Pipe size 65 A: 720.64Pipe size 80 A: 960.85, Pipe size 65 A: 872.84Pipe size 80 A: 1163.79

Display

QVGA 2.2" LCD color monitor

Display update cycle

Approx. 3 Hz

Display Resolution

0.01 CFM, 0.01 m3, 0.1 m3/h, 1 CF, 1 L, 1 L/min

Response Time

1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)

Measurement accuracy

±1.0% of F.S.*2*3*4*5, ±2.0% of RD*2*3*4*5

Zero point error

±0.15% of F.S.*2*6

Static leakage repeatability

±1.0% of RD*4*7

Hysteresis

Variable

Flow units

CFM, CFM(S), L/min, L/min (N), L/min (S), m3/h, m3/h (N), m3/h (S)

I/O wiring connection port

M12 4-pin connector (male)

Detection mode (switchable)

Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)*8, Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input*8

Standard I/O (switchable)

4 to 20 mA/0 to 20 mA, input time: 20 ms or more, load resistance: 500 Ω or less, max. 100 mA/ch, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less

Protection Circuit

Power supply reverse connection protection, power supply surge protection, Short-circuit protection for each output, Surge protection for each output

Analog input (for volume conversion)

analog current input (4 to 20 mA), input resistance: 100Ω or less, M8 4-pin connector (female)

Power supplied to pressure sensor

Supply current:70 mA or less (analog output of the pressure sensor included), Supply voltage: Equivalent to voltage applied to the FD-G

Communication interface

100 Mbps, Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable, D-code), IEEE 802.3u (100BASE-TX), M12 connector (female, USB 2.0

Network function

EtherNet/IP™, IO-Link*9, Modbus TCP

Recording capacity

100, Approx. 5 years

Power supply

class 2, 20 to 30 VDC including 10% ripple (P-P), 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 290 mA or less at 24 V, 350 mA or less at 20 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded), 490 mA or less at 24 V, 550 mA or less at 20 V

Environmental resistance

10 to 500 Hz, 100 m/s2, 1000 times for each axis, 16 ms pulse, 5 to 85%RH (no condensation), Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing), IP65/67 (IEC 60529)*10, power spectral density: 0.816 G2/Hz, XYZ axes

material

Body: PBT + coating, Body: PPS/SUS304, display: PMMA, Ethernet port: zinc nickel plating, Power supply port: SUS304-equivalent, rear surface: rubber, SUS304

Weight

Approx. 3.6 kg

Brand

Keyence

Description

Enhance Your Gas Flow Monitoring with the Keyence FD-G80L Clamp-On Gas Flow Meter

Experience accurate and reliable gas flow measurements with the Keyence FD-G80L clamp-on gas flow meter. Designed to support a variety of pipe sizes and materials, this flow meter can easily handle different fluids and temperatures, providing versatile performance in various industrial settings.

Ensure efficient monitoring with the wide flow rate range and quick response time of the FD-G80L.
Benefit from the user-friendly display and interface, making it easy to read and interpret flow data.
Enjoy enhanced connectivity options with various I/O wiring connections, communication interfaces, and network functions.

With its robust construction and environmental resistance, the Keyence FD-G80L clamp-on gas flow meter is a reliable solution for precise gas flow measurement requirements, ensuring accurate results and smooth operation in diverse industrial applications.