Name: FD-G125 Keyence Clamp-On Gas Flow Meter | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

FD-G125

Pipe size

100 A, 125 A, 3.1 to 6.8 mm 0.122" to 0.27", 4", 5", ø111 to 117 mm 4.37" to 4.61", ø138 to 144 mm 5.43" to 5.67"

Supported pipe materials

Iron, stainless steel, steel

Supported fluids

Air, Nitrogen, other gases*1

Fluid temperature

0 to 60ºC 32 to 140 °F

Recommended pressure

0.4 MPa or greater (58 PSI or greater)

Rated velocity of flow range

Up to 15 m/s

Actual flow rate range (typical)

Pipe size 100 A: 280.00Pipe size 125 A: 420.00, Pipe size 100 A: 470.0Pipe size 125 A: 720.0, Pipe size 100 A: 7800Pipe size 125 A: 12000

Standard flow rate range (typical) [CFM]

Pipe size 100 A: 1326.34Pipe size 125 A: 1989.51, Pipe size 100 A: 1681.49Pipe size 125 A: 2522.23, Pipe size 100 A: 2036.63Pipe size 125 A: 3054.95, Pipe size 100 A: 2391.78Pipe size 125 A: 3587.67

Display

QVGA 2.2" LCD color monitor

Display update cycle

Approx. 3 Hz

Display Resolution

0.1 CFM, 0.1 m3, 0.1 m3/h, 1 CF, 1 L, 1 L/min

Response Time

1.0 s/2.5 s/5.0 s/10.0 s/30.0 s/60.0 s/120.0 s/200.0 s (variable)

Measurement accuracy

±1.0% of F.S.*2*3*4*5, ±2.0% of RD*2*3*4*5

Zero point error

±0.15% of F.S.*2*6

Static leakage repeatability

±1.0% of RD*4*7

Hysteresis

Variable

Flow units

CFM, CFM(S), L/min, L/min (N), L/min (S), m3/h, m3/h (N), m3/h (S)

I/O wiring connection port

M12 4-pin connector (male)

Detection mode (switchable)

Instantaneous flow mode/area mode/pulse (+) mode/integrated flow mode/warning mode (consump)*8, Instantaneous flow mode/area mode/pulse (−) mode/warning mode (leak)/error output mode/analog output/integrated flow reset/flow rate zero input/origin adjustment input*8

Standard I/O (switchable)

4 to 20 mA/0 to 20 mA, input time: 20 ms or more, load resistance: 500 Ω or less, max. 100 mA/ch, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less

Protection Circuit

Power supply reverse connection protection, power supply surge protection, Short-circuit protection for each output, Surge protection for each output

Analog input (for volume conversion)

analog current input (4 to 20 mA), input resistance: 100Ω or less, M8 4-pin connector (female)

Power supplied to pressure sensor

Supply current:70 mA or less (analog output of the pressure sensor included), Supply voltage: Equivalent to voltage applied to the FD-G

Communication interface

100 Mbps, Category 5 or higher STP (shielded twisted pair) or UTP (unshielded twisted pair) cable, D-code), IEEE 802.3u (100BASE-TX), M12 connector (female, USB 2.0

Network function

EtherNet/IP™, IO-Link*9, Modbus TCP

Recording capacity

100, Approx. 5 years

Power supply

class 2, 20 to 30 VDC including 10% ripple (P-P), 230 mA or less at 30 V (load current excluded) (analog output of the pressure sensor excluded), 290 mA or less at 24 V, 350 mA or less at 20 V, 430 mA or less at 30 V (Maximum load current excluded) (analog output of the pressure sensor excluded), 490 mA or less at 24 V, 550 mA or less at 20 V

Environmental resistance

10 to 500 Hz, 100 m/s2, 1000 times for each axis, 16 ms pulse, 5 to 85%RH (no condensation), Detection head: −10 to +60°C 14 to 140°F (no freezing), display unit: −10 to +55°C 14 to 131°F (no freezing), IP65/67 (IEC 60529)*10, power spectral density: 0.816 G2/Hz, XYZ axes

material

Body: PBT + coating, Body: PPS/SUS304, display: PMMA, Ethernet port: zinc nickel plating, Power supply port: SUS304-equivalent, rear surface: rubber, SUS304

Weight

Approx. 2.7 kg

Brand

Keyence

Description

Keyence Clamp-On Gas Flow Meter (SKU: FD-G125)

Enhance Efficiency with the Keyence Clamp-On Gas Flow Meter, designed to provide accurate and reliable measurements for various fluids in pipes ranging from 4″ to 5″ in diameter. The versatile nature of this device allows for easy installation on iron, steel, or stainless steel pipes, making it a perfect fit for industrial applications.

Monitor a wide range of flow rates
Utilize the user-friendly display for quick readings
Benefit from exceptional measurement accuracy

With advanced features such as zero error point correction and various flow units available, the Keyence Clamp-On Gas Flow Meter offers high precision in a compact and durable package. Experience seamless integration with other systems through multiple communication interfaces, providing convenience and efficiency in your operations.