Fiber Optic Sensors

FS-V22X

Expansion unit: Infrared LED

Infrared LED (950 nm)

250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO) /4 ms (ULTRA TURBO) /500 µs (HIGH RESOLUTION) /50 µs (HIGH SPEED)

Light-ON/Dark-ON selectable

Light intensity/rising edge/falling edge

999 (variable), Max. ±1

FS-RS1

12 to 24 VDC ±10 %, 600 mW or less (25 mA or less), Ripple (P-P) 10 % or less

Y, 10 to 55 Hz, 2 hours in each of the X, 3 times in each of the X, 35 to 85 % RH (No condensation), 500 m/s2, and Z directions, Double amplitude 1.5 mm 0.06", FS-RS1 single unit: -10 to +55 °C 14 to 131 °FWhen amplifier expansion units are connected (3 to 10 units): -10 to +50 °C 14 to 122 °FWhen amplifier expansion units are connected (11 to 16 units): -10

PBT, Polycarbonate

30 mm (H) x 9 mm (W) x 70 mm (D) 1.18" (H) x 0.35" (W) x 2.76" (D)

Approx. 100 g (including 2-m cable)

Keyence

OP-42246

Communication Cable

a dedicated conversion connector is required (OP-26485 or OP-26486)., This cable is used to connect the FS-RS1 to a PC. To connect to a PC's RS232C port

FS-RS1

2 m 6.56'

Keyence

FS-V10

0-line expansion unit

NPN

Red LED

410 µs to 1.7 ms*1

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator: Red LEDDigital LED monitor: Seven segments, four digits, red LEDBar LED monitor: One orange LED and six green LEDs

FS-V11

Main unit

NPN

Red LED

250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator: Red LEDDigital LED monitor: Seven segments, four digits, red LEDBar LED monitor: One orange LED and six green LEDs

FS-V11P

Main unit

PNP

Red LED

250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator: Red LEDDigital LED monitor: Seven segments, four digits, red LEDBar LED monitor: One orange LED and six green LEDs

FS-V12

1-line expansion unit

NPN

Red LED

250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator: Red LEDDigital LED monitor: Seven segments, four digits, red LEDBar LED monitor: One orange LED and six green LEDs

FS-V12P

1-line expansion unit

PNP

Red LED

250 µs (FINE) /500 µs (TURBO) /1 ms (SUPER TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator: Red LEDDigital LED monitor: Seven segments, four digits, red LEDBar LED monitor: One orange LED and six green LEDs

FS-M0

0-line expansion unit

–

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

410 µs to 1.2 ms*1

LIGHT-ON/DARK-ON (switch-selectable)

FS-M1

Main unit

NPN

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

250 µs (FINE) /500 µs (TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

FS-M1H

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

20 µs (FINE) /50 µs (TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

Output: Red LEDStable operation: Green LED

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

FS-M1P

Main unit

PNP

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

250 µs (FINE) /500 µs (TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

FS-M2

1-line expansion unit

NPN

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

250 µs (FINE) /500 µs (TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

FS-M2P

1-line expansion unit

PNP

Red LED

8-turn trimmer (with indicator), FINE/TURBO (switch-selectable)

250 µs (FINE) /500 µs (TURBO)

LIGHT-ON/DARK-ON (switch-selectable)

FS-T0

0-line expansion unit

–

Red LED

Button

410 µs to 1 ms*1

LIGHT-ON/DARK-ON (switch-selectable)

FS-T1

Main unit

NPN

Red LED

Button

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

FS-T1G

Green LED

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

Calibration indicator: Orange LED, Output indicator: Red LED, Stable operation indicator: Green LED

ON-delay: 40 ms/OFF-delay: 40 ms/Timer OFF (switch-selectable)

Non-voltage input (contact, solid state)

FS-T1P

Main unit

PNP

Red LED

Button

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

FS-T2

1-line expansion unit

NPN

Red LED

Button

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

FS-T2P

1-line expansion unit

PNP

Red LED

Button

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

FS-V1

Main unit

NPN

Red LED

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator (Two): Red LEDReceived light display: LCD(Two color display: Red and green)Calibration indicator: Orange LED

FS-V1P

Main unit

PNP

Red LED

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

Display indicator (Two): Red LEDReceived light display: LCD(Two color display: Red and green)Calibration indicator: Orange LED

FS-R0

410 µs to 1.2 ms *1

16 (15 when using stability output)

16

NPN open-collector 50 mA max. (40 V max.) Residual voltage: 1 V max.

Over-current protection, Reversed polarity protection, surge absorber

12 to 24 VDC ±5 %, 20 mA or less, plus current consumed by expansion units connected, Ripple (P-P) 5 % or less*2

FS-R3

350 µs to 1 ms *1

Red LED

2

NPN/PNP non-voltage input (contact, solid-state) switching

N.O./N.C. (selectable)

12 to 24 VDC ±5 %, 50 mA or less, plus current consumed by connected sensor (100 mA or less), Ripple (P-P) 5 % or less*2

OP-5766

Securing bracket that is used to mount the sensor amplifier.

FS-T/X Series, FS2

Keyence

OP-6025

Securing bracket that is used for mounting with the same thread pitch as the FS-17 fiber amplifier.

FS-T/X Series, FS2

Keyence

FS-17P

―

Red LED

7-turn trimmer

―

Approx 0.5 ms

―

Keyence

FS-T22P

Auto

―

Red LED

Button

―

500 µs

FS2-60

Trimmer：Long detecting distance

Red LED

8-turn trimmer

250 µs

LIGHT-ON/DARK-ON (switch-selectable)

Output: Red LEDStable operation: Green LED