Laser Sensors

LV-H35

Straight-beam coaxial

Class II

Visible red semiconductor laser

660 nm

150 mm 5.91", 300 mm 11.81", 600 mm 23.62"

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H35F*1

Straight-beam coaxial

Class II

Visible red semiconductor laser

660 nm

100 mm 3.94", 200 mm 7.87", 450 mm 17.72"

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H37

Ultra-small beam spot

Class II

Visible red semiconductor laser

660 nm

70 ±15 mm 2.76" ±0.59"

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H41

long-distance area

Class I

Invisible infrared semiconductor laser

785 nm

1000 mm 39.37", 250 mm 9.84", 500 mm 19.69"

-10 to +55 °C 14 to 131 °F (No freezing)

LV-H42

long-distance area

Class II

Visible red semiconductor laser

660 nm

1000 mm 39.37", 250 mm 9.84", 500 mm 19.69"

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H47

Area definite reflective

Class II

Visible red semiconductor laser

660 nm

55 to 85 mm 2.17" to 3.35"

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H62

small beam spot

Class II

Visible red semiconductor laser

660 nm

2 m 6.6', 5 m 16.4', 7 m 23.0'

-10 to +55 °C 14 to 131 °F (No freezing)

LV-H62F*1

Retro-reflective

Class II

Visible red semiconductor laser

660 nm

1.5 m 4.9', 3.5 m 3.5', 5 m 16.4'

-10 to +55 °C 14 to 131 °F (No freezing), 35 to 85 % RH (No condensation)

LV-H64

Long distance

Class II

Visible red semiconductor laser

660 nm

100 to 500 mm 3.94" to 19.69" (100 to 700 mm 3.94" to 27.56")*1, 200 to 850 mm (300 to 1000 mm)7.87" to 33.46" (11.81" to 39.37")*1, 400 to 1200 mm (600 to 1500 mm)15.75" to 47.24" (23.62" to 59.06")*1

-10 to +55 °C 14 to 131 °F (No freezing)

LV-H65

Wide

Class II

Visible red semiconductor laser

660 nm

10 to 150 mm 0.39" to 5.91" (10 to 250 mm 0.39" to 9.84")*1, 100 mm 3.94" (150 mm5.91")*1, 100 to 200 mm 3.94" to 7.87" (150 to 350 mm 5.91" to 13.78")*1

-10 to +55 °C 14 to 131 °F (No freezing)

LV-H67

High power

Class II

Visible red semiconductor laser

660 nm

20 m 65.6', 30 m *1 98.4', 30 m 98.4'

-10 to +55 °C 14 to 131 °F (No freezing)

OP-42128

Expansion loose wire cable

LV-11, LV-21, LV-51, PJ-50AR

20 m 65.62' roll

4-core (Brown, Black, Blue, f6.0, Orange)

Keyence

OP-42129

Expansion loose wire cable

AP-1*, FS-L, LV-11, LV-21, LV-51, PI-G, PJ-50AT

20 m 65.62' roll

4-core (Brown, Blue, f6.0, Orange, Pink)

Keyence

LV-B101

Mounting Bracket for Portrait Orientation

LV-NH100/NH110/H100/H110

Keyence

LV-B102

Mounting Bracket for Landscape Orientation

LV-NH100/NH110/H100/H110

Keyence

LV-B301

Mounting Bracket for Portrait Orientation

LV-NH300/H300

Keyence

LV-B302

Mounting Bracket for Landscape Orientation

LV-NH300/H300

Keyence

LV-L01

MEGA : 480*1ULTRA：400 mmSUPER：300 mmTURBO：200 mmFINE：100 mmHSP：80 mm, MEGA : 600*1ULTRA：500 mmSUPER：375 mmTURBO：250 mmFINE：125 mmHSP：100 mm, MEGA : 720*1ULTRA：600 mmSUPER：450 mmTURBO：300 mmFINE：150 mmHSP：120 mm, MEGA : 840*1ULTRA：700 mmSUPER：525 mmTURBO：350 mmFINE：175 mmHSP：140 mm, MEGA : 960*1ULTRA：800 mmSUPER：600 mmTURBO：400 mmFINE：200 mmHSP：160 mm

Detecting distance at 50 mm : 11.5 mmDetecting distance at 100 mm : 20 mmDetecting distance at 150 mm : 29 mm, Detecting distance at 50 mm : 15 mmDetecting distance at 100 mm : 26 mmDetecting distance at 150 mm : 37 mm, Detecting distance at 50 mm : 5.5 mmDetecting distance at 100 mm : 10 mmDetecting distance at 150 mm : 14 mm, Detecting distance at 50 mm : 7.5 mmDetecting distance at 100 mm : 13 mmDetecting distance at 150 mm : 19 mm, Detecting distance at 50 mm : 9.5 mmDetecting distance at 100 mm : 17 mmDetecting distance at 150 mm : 24 mm

Detecting distance at 50 mm : 2.6 mmDetecting distance at 100 mm : 4 mmDetecting distance at 150 mm : 5.5 mm

Arton (lens), Polyacetal (main unit)

Approx. 1 g

Keyence

OP-42198

Long-distance reflector

LV-H67

Base: ABS, Reflector: Acrylic

Keyence

OP-51428

Reflective tape used with polarized retro-reflective laser sensor (50x15mm).

LV-H64, LV-H65

Acrylic adhesive, Polycarbonate

Keyence

R-6

Reflector

LV Series

Keyence

R-7

Reflector

LV Series

Keyence

R-8

Reflector

LV Series

Keyence

LZ-A152

Many-turn trimmer (7 turns)

Switchable by way of a switch (LIGHT ON => DARK ON)

―, 2.5ms or less

1s or less

Operation: red LED

NPN open-collector 100 mA max. (40 V max.)

LZ-153

40 to 60 mm 1.57" to 2.36" (spot diameter: 1 mm ø0.04" or less)

Semiconductor laser

Opaque material, translucent material, transparent material

Copper wire with a diameter of 0.01 mm

0.05 mm

±0.02 mm 0.0008"

LZ-155

Small spot reflective model sensor head

40 to 60 mm 1.57" to 2.36" (spot diameter: 1 mm ø0.04" or less)

1.4 mW maximum, Class 2, Semiconductor laser, wavelength: 670 mm

Transparent and opaque

Copper wire with a diameter of 0.01 mm

0.05 mm

IX-1000

Main Unit

±999.99 to ±999 mm (with 4 selectable steps)*1, 10 µm*1

Alignment adjustment: 1 tool*2, Height, Height (Ave./Max./Min.), Height detection, Height difference, Height difference (Ave./Max./Min.), Height difference calculation, Max./Min., Monochromatic detection, Position adjustment, Position adjustment: 1 tool, Position adjustment: 1 tool*2, Position adjustment(Max. number of settings) Detection: 16 tools, Thickness calculation, Tilt correction(Max. number of settings) Detection: 16 tools

2-point calibration, Alarm setting, Ambient light removal for measurement, Automatic brightness adjustment, Average count, Capture mode (HDR) Sensor date/time Information addition, Fixed reference area, Glare removal, Head tilt correction (fixed only), HOLD function, I/O monitor, Imaging mode (high gain), Laser position adjustment, Light interference prevention, Lighting (ON/OFF), Mask outline, Measurement direction, Measurement method (Ave./Max./Min.), Measurement mode, Measurement noise elimination, Measurement position (small/standard/large), Measurement range, Monochrome histogram, N.O./N.C. switching, NPN/PNP switching, Operating threshold adjustment, Position correction NG measurement, Rotation range, Security, Simultaneous main unit/expansion unit input, Tilt correction (fixed or real-time correction), Timing input, Total judgment conditions, Trigger delay, Trigger error, Trigger input (internal/external), Trigger interval, ZERO/offset, Zero/offset recording

OFF current 0.1 mA or lower, 8 (IN1 to IN8), IN1: External trigger up/down timing, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Laser emission stop, Non-voltage input/voltage input is switchableFor non-voltage input: ON voltage 2 V or lower, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V), ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, Reset (error only), Reset (judgment value only) Reset (judgment value and error), Zero/offset (batch)

10 (OUT1 to OUT10), 50 mA (20 mA when linked to an expansion unit), Alarm, Any OK/NG), busy, Enable by assigning the optional functionsAssignable functions: Total judgment result (All OK, error, Height/height difference/Max./Min./calculation tool result (OK/NG/HIGH/LO), Monochromatic detection/Height detection tool result (OK/NG), N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, Open collector output; NPN/PNP switchable, position adjustment result, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, residual voltage of 2 V or less, run, tilt correction result

IX-1050

Expansion Unit

±999.99 to ±999 mm (with 4 selectable steps)*1, 10 µm*1

Alignment adjustment: 1 tool*2, Height, Height (Ave./Max./Min.), Height detection, Height difference, Height difference (Ave./Max./Min.), Height difference calculation, Max./Min., Monochromatic detection, Position adjustment, Position adjustment: 1 tool, Position adjustment: 1 tool*2, Position adjustment(Max. number of settings) Detection: 16 tools, Thickness calculation, Tilt correction(Max. number of settings) Detection: 16 tools

2-point calibration, Alarm setting, Ambient light removal for measurement, Automatic brightness adjustment, Average count, Capture mode (HDR) Sensor date/time Information addition, Fixed reference area, Glare removal, Head tilt correction (fixed only), HOLD function, I/O monitor, Imaging mode (high gain), Laser position adjustment, Light interference prevention, Lighting (ON/OFF), Mask outline, Measurement direction, Measurement method (Ave./Max./Min.), Measurement mode, Measurement noise elimination, Measurement position (small/standard/large), Measurement range, Monochrome histogram, N.O./N.C. switching, NPN/PNP switching, Operating threshold adjustment, Position correction NG measurement, Rotation range, Security, Simultaneous main unit/expansion unit input, Tilt correction (fixed or real-time correction), Timing input, Total judgment conditions, Trigger delay, Trigger error, Trigger input (internal/external), Trigger interval, ZERO/offset, Zero/offset recording

OFF current 0.1 mA or lower, 8 (IN1 to IN8), IN1: External trigger up/down timing, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Laser emission stop, Non-voltage input/voltage input is switchableFor non-voltage input: ON voltage 2 V or lower, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V), ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, Reset (error only), Reset (judgment value only) Reset (judgment value and error), Zero/offset (batch)

10 (OUT1 to OUT10), 50 mA (20 mA when linked to an expansion unit), Alarm, Any OK/NG), busy, Enable by assigning the optional functionsAssignable functions: Total judgment result (All OK, error, Height/height difference/Max./Min./calculation tool result (OK/NG/HIGH/LO), Monochromatic detection/Height detection tool result (OK/NG), N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, Open collector output; NPN/PNP switchable, position adjustment result, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, residual voltage of 2 V or less, run, tilt correction result

IX-H2000

Main Unit

±999.95 to ±999 mm 39.33" (with 4 selectable steps) *1, ±999.99 to ±999 mm 39.33" (with 4 selectable steps) *1, 10 μm *1, 50 μm *1

Height, Height (Ave./Max./Min.), Position adjustment, Position adjustment: 1 tool, Position adjustment: 1 tool*2, Thickness calculation, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgment: 16 tools, Average height, Edge position, Height area, MAX/MIN, Monochrome area, Pin height, Step, Step (Ave./Max./Min.), Step calculation, Step/width calculation, Tilt adjustment (Max. number of settings) Judgment: 16 tools *3, Tilt adjustment: 1 tool*2, Width, Width/diameter

mutual interference prevention, 2-point calibration, Alarm setting, Ambient light removal for measurement, Area height histogram, Automatic brightness adjustment, Average count, Averaging filter, Capture mode (HDR), Fixed reference area, Glare removal, Head tilt correction (fixed only), Height image display on tool setting screen, HOLD function, I/O monitor, Imaging mode (high gain), Laser position adjustment, Laser sensitivity adjustment, Lighting (ON/OFF), Mask outline, Measurement direction, Measurement method (Ave./Max./Min.), Measurement mode, Measurement noise elimination, Measurement position (small/standard/large), Measurement range, Median filter, Monochrome histogram, N.O./N.C. switching, NPN/PNP switching, Operating threshold adjustment, Position correction NG measurement, Rotation range, Scaling function, Security, Sensor date/time information addition, Simultaneous main unit/expansion unit input, Tilt correction (fixed or real-time correction), Timing input, Total judgment conditions, Trigger delay, Trigger error, Trigger input (internal/external), Trigger interval, X-axis median filter, ZERO/offset, Zero/offset recording

OFF current 0.1 mA or lower, 8 (IN1 to IN8), IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Laser emission stop, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V), ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, Reset (error only), Reset (judgment value only) Reset (judgment value and error), Switchable between non-voltage input and voltage inputFor non-voltage input: ON voltage 2 V or lower, Zero/offset (batch)

10 (OUT1 to OUT10), 50 mA (20 mA when linked to an expansion unit), Alarm, busy, Enable by assigning the optional functionsAssignable functions: Total judgment result (All OK/Any OK/NG), error, Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Monochrome area / Height area tool result (OK/NG), N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, Open collector output; NPN/PNP switchable, position adjustment result, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, residual voltage of 2 V or less, Result of the logical operation of each tool, run, Tilt adjustment result

IX-H2050

Expansion Unit

±999.95 to ±999 mm 39.33" (with 4 selectable steps) *1, ±999.99 to ±999 mm 39.33" (with 4 selectable steps) *1, 10 μm *1, 50 μm *1

Height, Height (Ave./Max./Min.), Position adjustment, Position adjustment: 1 tool, Position adjustment: 1 tool*2, Thickness calculation, 1-axis adjustment, 2-axis adjustment (Max. number of settings) Judgment: 16 tools, Average height, Edge position, Height area, MAX/MIN, Monochrome area, Pin height, Step, Step (Ave./Max./Min.), Step calculation, Step/width calculation, Tilt adjustment (Max. number of settings) Judgment: 16 tools *3, Tilt adjustment: 1 tool*2, Width, Width/diameter

mutual interference prevention, 2-point calibration, Alarm setting, Ambient light removal for measurement, Area height histogram, Automatic brightness adjustment, Average count, Averaging filter, Capture mode (HDR), Fixed reference area, Glare removal, Head tilt correction (fixed only), Height image display on tool setting screen, HOLD function, I/O monitor, Imaging mode (high gain), Laser position adjustment, Laser sensitivity adjustment, Lighting (ON/OFF), Mask outline, Measurement direction, Measurement method (Ave./Max./Min.), Measurement mode, Measurement noise elimination, Measurement position (small/standard/large), Measurement range, Median filter, Monochrome histogram, N.O./N.C. switching, NPN/PNP switching, Operating threshold adjustment, Position correction NG measurement, Rotation range, Scaling function, Security, Sensor date/time information addition, Simultaneous main unit/expansion unit input, Tilt correction (fixed or real-time correction), Timing input, Total judgment conditions, Trigger delay, Trigger error, Trigger input (internal/external), Trigger interval, X-axis median filter, ZERO/offset, Zero/offset recording

OFF current 0.1 mA or lower, 8 (IN1 to IN8), IN1: External trigger ↑↓ / Timing input, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Laser emission stop, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V), ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, Reset (error only), Reset (judgment value only) Reset (judgment value and error), Switchable between non-voltage input and voltage inputFor non-voltage input: ON voltage 2 V or lower, Zero/offset (batch)

10 (OUT1 to OUT10), 50 mA (20 mA when linked to an expansion unit), Alarm, busy, Enable by assigning the optional functionsAssignable functions: Total judgment result (All OK/Any OK/NG), error, Height / Step / Max./Min. / Calculation tool result (OK/NG/HIGH/LO), Monochrome area / Height area tool result (OK/NG), N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, Open collector output; NPN/PNP switchable, position adjustment result, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, residual voltage of 2 V or less, Result of the logical operation of each tool, run, Tilt adjustment result