Name: NR-X100W Keyence Multi-input Data Logger | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

NR-X100W

Main unit buffer memory capacity

50M data*1

Expansion memory

SD card (SD/SDHC)*2

PC interface

100Base-TX (AUTO MDI/MDIX supported) *3, Connection via NR-XW1 wireless LAN unit, IEEE 802.11b/g/n *3, RJ45 connector, Simultaneous USB connection from one PC to up to four units (switchable by ID switch), USB 2.0 High-speed–compliant, USB mini-B connector

Network function

FTP client function, FTP server function, SNTP client function

Display/operation

Operation via NR-XCP30 control panel, or via WAVE LOGGER X with PC connection

Expansion remote unit connection

B port)Unit expansion possible by connecting up to eight NR-XR01 remote units (connected by remote unit cable), Dedicated remote connection connector × 2 (Remote OUT A port

Number of connectable measurement units

Max. 72 units*5, Max. 8 units*4

Continuous acquisition speed

Max. 100 kHz for all acquisition channels *6, Max. 500 kHz for all acquisition channels *6*7

Inter-unit synchronization

±1 μs or less *8

Time axis accuracy

±50 ppm (23°C ±3°C 73.4°F ±5.4°F); Same time used for all remote groups, SNTP server time synchronization possible

Synchronous trigger input (SYNC input)

• For non-voltage input: ON voltage 1.0 V or lower (short circuit current: 1 mA typ.), • Use as external trigger input (normal mode) or synchronous acquisition input (logging mode)• Non-voltage (contact/non-contact)/voltage input, Falling edge input• Not insulated from system bus, Max. input voltage: 6 V, OFF current 0.1 mA or lower• For voltage input: ON voltage (Lo) 1.0 V or lower, OFF voltage (Hi) 2.4 V or more

Control input

• External trigger input (TRG IN): Edge input• Acquisition start/stop input (START IN): Level input (only enabled in external control mode)• Auto-balance input (BAL): Edge input (only enabled in exter, • Input type: Bidirectional voltage input• Maximum rating: 30 VDC, Maximum OFF current: 0.2 mA• Insulation between input and system bus (500 VDC/1 minute), Minimum ON voltage: 10 VDC

Control Output

• Output format: Photo MOS relay output• Maximum rating: 36 VDC, • Trigger output (TRG OUT): N.O. output, one-shot output• System error output (SYS ERR): N.C. output• Alarm output (ALARM): N.O. output• Judgment output 1 to 4 (OUT1 to 4): N.O. output• Ready output (READY): N.O. output, Output current: 50 mA or less (9-point total: 300 mA or less)• Leak current at OFF: 0.1 mA or less, Residual voltage when ON: 1 V or less• Insulation between output and system bus (500 VDC/1 minute)

Power supply

8.4 W or less (excluding connected units)

Environmental resistance

0 to +40°C 32°F to 104°F, 10 to 85% RH (no condensation)

Weight

Approx. 490 g 17.30 oz (including approx. 10 g 0.35 oz for the OP-88512 (NR-X100W I/O terminal block))

Brand

Keyence

Description

Keyence NR-X100W Multi-input Data Logger

Experience seamless data collection and management with the Keyence NR-X100W Multi-input Data Logger. With a 50M data buffer memory capacity and expandable memory through an SD card, you can capture and store vast amounts of information effortlessly. The USB and network interfaces allow for easy connectivity to multiple units, enhancing productivity and efficiency in data acquisition.

Utilize the NR-X100W’s wireless LAN function for convenient operation and control, either through a control panel or PC connection. With the ability to connect up to eight remote units, you can expand your monitoring capabilities with ease. The precise time axis accuracy and synchronization features ensure reliable data collection for in-depth analysis and decision-making.

Effortless Data Collection: Large buffer memory capacity and expandable storage options
Convenient Connectivity: USB and network interfaces for seamless integration
Enhanced Monitoring: Wireless LAN function and expandable remote unit connection
Precise Data Analysis: Accurate time axis and synchronization for reliable results