| Model | MP-FN80 |
|---|
| Type | Single model |
|---|
| Connection bore diameter | NPT1" (25A) |
|---|
| Supported gases | Air and non-corrosive gases |
|---|
| Supported gas temperature | -5 to +50°C, 23 to 122°F |
|---|
| Operating pressure range | 0.2 to 1 MPa, 2 to 10 bar, 29 to 145 psi *1 |
|---|
| Pressure resistance | 1.5 MPa, 15 bar, 217.5 psi |
|---|
| Flow rate | ±(1.5% of RD + 0.5% of F.S.) *2 *3, ±1.0% of F.S. (with an averaging time of 1.0 s), 150 ms (63% response) *4, Heat based (mass flow rate), OFF/100 ms/200 ms/500 ms/1.0 s/3.0 s/5.0 s/10 s/30 s (selectable), 0.1 CFM, 0.1 m3/h 3.53 ft3/h, 0.4 CFM, 0.7 m3/h 24.72 ft3/h, 1 L/min, 12 L/min, 12 to 8000 L/min0.7 to 480.0 m3/h 24.72 to 16951.04 ft3/h 0.4 to 282.5 CFM |
|---|
| Pressure (Digital value, gauge pressure) | ±0.2% of F.S. (with a response time of 50 ms), ±2.0% of F.S., 0.0 to 145.0 psi, 0.00 to 10.00bar, 0.000 to 1.000 MPa, 0.001 MPa, 0.01 bar, 0.1 psi, 1.0 s, 100 ms, 50 ms, 500 ms, and 5.0 s *4, Selectable from 10 ms |
|---|
| Humidity (Dew point) | ±4°C, ±7°F *5 *6, 1°F *5 *6, 15 to 100%RH (no condensation)/Corresponds to the relative humidity range *5 *6, 5%RH/1°C |
|---|
| Temperature | ±2.0°C, ±3.6°F *7, 0.1°C, 0.1°F *7 |
|---|
| Shut-off valve | 1 s or less (closed → open), 50 mL/min 0.002 CFM (N) or less |
|---|
| Filter/regulator (Standard model only) | ─ |
|---|
| Check valve | Available |
|---|
| Display | Color LCD, status indicator |
|---|
| Data accumulation | Accumulated data: approx. 2 years/Instantaneous data: approx. 2 weeks, USB 2.0/Ethernet |
|---|
| I/O | 4 to 20 mA, input time: 20 ms or more, load resistance: 260 Ω or less *4, max. 100 mA/Ch., N.O./N.C. setting switchable, NPN/PNP setting switchable, open collector output 30 VDC or less, residual voltage: 2.5 V or less, Short-circuit current: 1.5 mA or less |
|---|
| Protection Circuit | overcurrent protection for each output, Power supply reverse connection protection, power supply surge protection, reverse connection protection for each I/O, surge protection for each I/O |
|---|
| Power supply | 1.2 A (300 ms) when opening/closing valve, 100 mA at all other times *8 (standalone usage; excluding load current), 24 VDC +25%/-20% (including ripple), Class 2 or LPS |
|---|
| Communication interface | USB2.0 |
|---|
| Network compatibility | MC protocol/SLMP, Modbus/TCP, PROFINET, When using only this unit: IO-Link (Specification v1.1/COM3) *9When connecting MP-FEN1 : EtherNet/IP™ |
|---|
| Environmental resistance | Y, −5°C to +50°C 23°F to 122°F (no freezing) *11, 10 times for each axis, 10 to 500 Hz; power spectral density: 0.204 G2/Hz; X, 300 m/s2, 35%RH to 85%RH (no condensation), and Z directions, IP67 (IEC60529) *10, XYZ axes |
|---|
| material | Sensor part : PET/PPS/PBT/POM/aluminum/SPHCFilter/regulator : Aluminum/POM/HDPE/NBR/Nylon *12 |
|---|
| Weight | Approx. 1920 g 67.73 oz |
|---|
| Brand | Keyence |
|---|
![Keyence MP-FN80 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/mp-fn80-industify-1.jpg "Keyence MP-FN80 [urunkategori] - industify.com")
![Keyence FD-H63F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h63f-industify-1.jpg)
![Keyence FD-H32F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h32f-industify-1.jpg)
![Keyence FI-T100 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-t100-industify-1.jpg)
![Keyence FD-H32 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h32-industify-1.jpg)
![Keyence FI-C40F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-c40f-industify-1.jpg)
![Keyence FD-HY1 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-hy1-industify-1.jpg)
Reviews
There are no reviews yet.