Modular PLCs

KV-CAC1H

and Z directions, Y, −20 to +60°C -4 to +140°F (No freezing), 0 to +50°C 32 to 122°F (No freezing), 10 to 500 Hz; Power spectral density:0.033 G2/Hz; X, 3, 35 to 85% RH (No condensation), IP64*1

1/2.9-inch color CMOS, 10/30/120 fps, 640 (H) × 480 (V), 70 mA or less *2, Approx. 65 g 2.29 oz, Horizontal field of view: Varies by lensVertical field of view: Varies by lens, Varies by lens

Keyence

KV-CAC1R

and Z directions, Y, −20 to +60°C -4 to +140°F (No freezing), 0 to +50°C 32 to 122°F (No freezing), 10 to 500 Hz; Power spectral density:0.033 G2/Hz; X, 3, 35 to 85% RH (No condensation), IP64*1

1/2.9-inch color CMOS, 10/30 fps, 1280 (H) × 960 (V), 70 mA or less *2, Approx. 65 g 2.29 oz, Horizontal field of view: Varies by lensVertical field of view: Varies by lens, Varies by lens

Keyence

KV-CAL03

3.5 mm 0.14"

F1.6 to CLOSE

0.1 m 0.3'

KV-CAC1H/KV-CAC1R

Keyence

KV-CAL06

6 mm 0.24"

F1.4 to CLOSE

0.2 m 0.7'

KV-CAC1H/KV-CAC1R

Keyence

KV-CAL16

16 mm 0.63"

F1.6 to CLOSE

0.4 m 1.3'

KV-CAC1H/KV-CAC1R

Keyence

KV-CAL50

50 mm 1.97"

F1.8 to CLOSE

1.0 m 3.3'

KV-CAC1H/KV-CAC1R

Keyence

Keyence

Keyence

KV-N1

Connection conversion unit For connector type unit connection

For connecting connector type expansion units

90 g

Keyence

KV-NC1

Connection conversion unit For terminal block type unit connection

For connecting terminal block type expansion units

80 g

Keyence

KV-PU1

AC power unit

100 to 240 VAC (-15%/+10%) (50/60 Hz)

24 VDC ±10%

1.8 A (total power supply to various units and extra power supply)

0.96 A or less

20 ms or less (depending on rated I/O conditions)

Keyence

KV-H1G-DL

Programming support software

Windows® 11/10/8 (8.1 included)/7 (SP1 or later)

6400 MB or more

Keyence

Keyence

KV-M32G

SDHC standard

industrial grade

32 GB

Keyence

Keyence

NE-Q05

2, 2 times in each of the X, and Z directions, Y, -20 to +70°C -4 to 158°F, 0 to +50°C 32 to 122°F *1 (no freezing), 1, 10 to 95%RH (no condensation), 180 mA, 2000m or less, 24 VDC ± 10%, 50 MΩ or more (tested with a 500 VDC megger, 50 ns (by way of a noise simulator), 500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case, 500 Vp-p, Acceleration: 150 m/s2, Acceleration: 4.9 m/s2*2, Acceleration: 9.8 m/s2*2, Amplitude: 0.035 mm*2, Amplitude: 0.075 mm*2, Approx 180g, between the power supply terminal and the communication terminal and between all the external terminals and the case), I, Minimal amount of dust and corrosive gas present, operating time: 11 ms, pulse width: 1 µs

2048, None, Priority control of EtherNet/IP™ cyclic data

full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control, Half duplex: back pressure, Store and forward method

Keyence

NE-Q05P

2, 2 times in each of the X, and Z directions, Y, -20 to +70°C -4 to 158°F, 0 to +50°C 32 to 122°F *1 (no freezing), 1, 10 to 95%RH (no condensation), 2.2 A, 2000m or less, 24 VDC ± 10%, 50 MΩ or more (tested with a 500 VDC megger, 50 ns (by way of a noise simulator), 500 VAC for 1 minute between the power supply terminal and the communication terminal and between all the external terminals and the case, 500 Vp-p, Acceleration: 150 m/s2, Acceleration: 4.9 m/s2*2, Acceleration: 9.8 m/s2*2, Amplitude: 0.035 mm*2, Amplitude: 0.075 mm*2, Approx 260g, between the power supply terminal and the communication terminal and between all the external terminals and the case), I, Minimal amount of dust and corrosive gas present, operating time: 11 ms, pulse width: 1 µs

2048, Priority control of EtherNet/IP™ cyclic data, 2 ports, conforms to IEEE802.3af, supply power: 15.4 W/port (44 to 57 VDC)

full duplex: conforms to IEEE802.3x; pose packets are used to perform flow control, Half duplex: back pressure, Store and forward method

Keyence

OP-21734

MIL connector dedicated crimping tool

HC, KL, KV/KZ

Approx. 80 g

Keyence

OP-22186

MIL connector contact

HC, KL, KV/KZ

200 units

The special crimping tool for the MIL connector (OP-21734) is necessary for connector crimping.

Keyence

OP-23139

MIL 34-pin connector set

KV-C32*/SC20V, KZ-A500/300/350

includes 40 standard contacts, Vertical-type

Keyence

OP-42224

MIL 34-pin slim connector set

and contacts (40 units) for the AWG22 to 24., hood cover, Set that includes slim type housing

KV-C32*/C64*/SC20V

Includes 40 standard contact units

Keyence

Keyence

OP-88386

KV-CA1H, KV-CA1W

Keyence

OP-88387

KV-CA1H, KV-CA1W

Keyence

Keyence

KV-8000A

1 minute (between the power supply terminal and the I/O terminals and between the external terminals and the case), 1500 VAC, 2, 2000 m 6561.7' or less, No dust or corrosive gas, with 500 VDC megohmmeter), 1500 Vp-p or morePulse width: 1 μs, 400 mA or less*2, 50 MΩ or more (between the power terminals and the I/O terminals, 50 ns (based on a noise simulator)IEC standard-compliant (IEC61000-4-2/3/4/6), Acceleration 150 m/s2 492.1'/s2, Acceleration 4.9 m/s2 16.1'/s2*1, Acceleration 9.8 m/s2 32.2'/s2*1, and between the external terminals and the case, Half amplitude 1.75 mm 0.07"*1, Half amplitude 3.5 mm 0.14"*1, I (II when using KV-PU1), KV-8000A: Approx. 340 gKV-B1 (battery): Approx. 10 g, Operation time 11 ms, System configuration using an expansion unit for KV-5000/3000 Series: -20 to +70°C -4 to +158°FSystem configuration using an expansion unit for KV-8000/7000 Series only: -25 to +75°C -13 to +167°F, System configuration using an expansion unit for KV-5000/3000 Series: 0 to +50°C 32 to 122°F (No freezing)System configuration using an expansion unit for KV-8000/7000 Series only: 0 to +55°C 32 to 13, System configuration using an expansion unit for KV-5000/3000 Series: 10 to 95% RH (No condensation)System configuration using an expansion unit for KV-8000/7000 Series only: 5 to 95% RH (No condensat, System configuration using an expansion unit for KV-5000/3000 Series: 24 VDC (±10%)System configuration using an expansion unit for KV-8000/7000 Series only: 24 VDC (-15%/+20%), twice in each of the X, Y and Z directions

CPU error, Flash ROM can be written 10000 times, mnemonic, RAM error, 12 points 32 bits, 1280 points 1 bit, 133 instructionsTotal: 341 classes, 16 units (KV-8000/7000 Series expansion unit only)48 units (KV-8000/7000 Series expansion unit, 16000 points 1 bit, 181 instructionsApplied instructions: 55 classes, 327 instructionsExtended instructions: 78 classes, 32768 points 1 bit, 32768 points 16 bits, 4000 points 32 bits, 512 points 16 bits, 524288 points 16 bits, 64 MB, 64-point unit used), 64000 points 1 bit, 65535 points 16 bits, 714 instructions, 73 instructionsArithmetic operation instruction: 128 classes, 7600 points 16 bits, Approx. 1500 k steps, Approx. 224000, Approx. 285000, Backup condenser lasts approx. 15 days (at 25°C 77°F)(Approx. 5 years with KV-B1 (battery) (at 25°C 77°F)), Basic instructions: 80 classes, Basic instructions: Min. 0.96 nsApplied instructions: Min. 5.75 nsDouble precision floating-point instruction: Min. 58 ns, Expanded ladder, KV Script, KV-5000/3000 Seriesexpansion unit (when extension unit (KV-EB1) is used)), Maximum 3072 points for expansion(KV-EB1S/KV-EB1R: 2 units used, Nonvolatile RAM, other, Refresh mode, Stored program mode, Total 32000 points 1 bit

Keyence

KV-XCM02

2, 2 times in each of the X, 2000 m 6561.7' or less, 50 MΩ or more (between the power terminals and the I/O terminals and between the external terminals and the case, and Z directions, Application time: 11 ms, No dust or corrosive gas, with 500 VDC megohmmeter), Y, 1500 VAC for one minute (between the power terminals and the I/O terminals, 1500 Vp-p or more; Pulse duration: 1 μs, 50 ns (based on noise simulator); IEC standard-compliant (IEC 61000-4-2/3/4/6), Acceleration 4.9 m/s2 16.1'/s2*4, Acceleration 9.8 m/s2 32.2'/s2*4, Acceleration: 150 m/s2 492.1'/s2, and between the external terminals and the case), Half amplitude 1.75 mm 0.07"*4, Half amplitude 3.5 mm 0.14"*4, System configuration using a KV-5000/3000 Series expansion unit: −20 to +70°C -4 to +158°FSystem configuration using only a KV‑8000/7000 Series expansion unit: −25 to +75°C -13 to +167°F*2, System configuration using a KV-5000/3000 Series expansion unit: 0 to +50°C 32 to 122°F (No freezing)System configuration using only a KV‑8000/7000 Series expansion unit: 0 to +55°C 32 to 131°F (No fr, System configuration using a KV-5000/3000 Series expansion unit: 10 to 95% RH (No condensation)System configuration using only a KV‑8000/7000 Series expansion unit: 5 to 95% RH (No condensation)*2, System configuration using a KV-5000/3000 Series expansion unit: 24 VDC (±10%)System configuration using only a KV‑8000/7000 Series expansion unit: 24 VDC (−15%/+20%)*1

RJ-45 8-position modular connector × 2 ports, 100 m 328.1'*7, 10BASE-T: 10 Mbps100BASE-TX: 100 Mbps1000BASE-T: 1000 Mbps*5, 10BASE-T: 4100BASE-TX: 21000BASE-T: 1*8, 10BASE-T: Category 3 or higher UTP or STP (STP is recommended)100BASE-TX: Category 5 or higher UTP or STP (STP is recommended)1000BASE-T: Category 5e or higher UTP or STP (double-shielded STP is recom, 14, 200 mA or less, Approx. 190 g 6.71 oz, etc., FTP client, FTP server, KV-8000A/7500/7300, Socket communication, upper link communication

1024 (Microsoft SQL Server); 1000 (PostgreSQL, 200000 bytes*11, 4, DELETE, Function that buffers SQL statements if communication fails to enable retransmission when communication is restored Maximum buffer capacity: 1 GB per connection (SD card required), INSERT*10, MariaDB, Microsoft SQL Server, MySQL, Oracle Database), Oracle Database*9, PostgreSQL, SELECT*10, Stored procedure/Stored function execution, TRUNCATE, UPDATE

Keyence

XC-H20-01

1 m 3.3'

MIL – MIL

Keyence

XC-H20-03

3 m 9.8'

MIL – MIL

Keyence