Name: IX-1000 Keyence Image-Based Laser Sensor | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

IX-1000

Main Unit/Expansion Unit

Main Unit

Display

±999.99 to ±999 mm (with 4 selectable steps)*1, 10 µm*1

Tools

Alignment adjustment: 1 tool*2, Height, Height (Ave./Max./Min.), Height detection, Height difference, Height difference (Ave./Max./Min.), Height difference calculation, Max./Min., Monochromatic detection, Position adjustment, Position adjustment: 1 tool, Position adjustment: 1 tool*2, Position adjustment(Max. number of settings) Detection: 16 tools, Thickness calculation, Tilt correction(Max. number of settings) Detection: 16 tools

Other Functions

2-point calibration, Alarm setting, Ambient light removal for measurement, Automatic brightness adjustment, Average count, Capture mode (HDR) Sensor date/time Information addition, Fixed reference area, Glare removal, Head tilt correction (fixed only), HOLD function, I/O monitor, Imaging mode (high gain), Laser position adjustment, Light interference prevention, Lighting (ON/OFF), Mask outline, Measurement direction, Measurement method (Ave./Max./Min.), Measurement mode, Measurement noise elimination, Measurement position (small/standard/large), Measurement range, Monochrome histogram, N.O./N.C. switching, NPN/PNP switching, Operating threshold adjustment, Position correction NG measurement, Rotation range, Security, Simultaneous main unit/expansion unit input, Tilt correction (fixed or real-time correction), Timing input, Total judgment conditions, Trigger delay, Trigger error, Trigger input (internal/external), Trigger interval, ZERO/offset, Zero/offset recording

Input

OFF current 0.1 mA or lower, 8 (IN1 to IN8), IN1: External trigger up/down timing, IN2 to IN8: Enable by assigning optional functionsAssignable functions: Program switching, Laser emission stop, Non-voltage input/voltage input is switchableFor non-voltage input: ON voltage 2 V or lower, OFF current 0.2 mA or lower, ON current 2 mA (for 24 V), ON current 2 mA (short circuit)For voltage input: Maximum input rating 26.4 V, ON voltage 18 V or higher, Reset (error only), Reset (judgment value only) Reset (judgment value and error), Zero/offset (batch)

Output

10 (OUT1 to OUT10), 50 mA (20 mA when linked to an expansion unit), Alarm, Any OK/NG), busy, Enable by assigning the optional functionsAssignable functions: Total judgment result (All OK, error, Height/height difference/Max./Min./calculation tool result (OK/NG/HIGH/LO), Monochromatic detection/Height detection tool result (OK/NG), N.O./N.C. switchableFor open collector NPN output: Maximum rating of 26.4 V, Open collector output; NPN/PNP switchable, position adjustment result, residual voltage of 1.5 V or lessFor open collector PNP output: Maximum rating of 26.4 V, residual voltage of 2 V or less, run, tilt correction result

Analog voltage output

±5 V, 0 to 5 V, 1 to 5 V, Output impedance: 100 Ω*3

Analog current output

4 to 20 mA, max. load resistance: 350 Ω*3

Number of programs

Statistical information

Ave.), Count (Number of OKs / Number of NGs / Number of triggers)*1*4, Count (Number of OKs / Number of NGs / Number of triggers)Line mode: Measured value / Degree of similarity (Max., Max., Min., Processing time (Latest, Scan mode: Measured value / Degree of similarity (Max.

Detection record

400 images (FTP/SFTP Client function: Enable)500 images (FTP/SFTP Client function: Disable) *5, 80 images (FTP/SFTP Client function: Enable)100 images (FTP/SFTP Client function: Disable) *5

Detection history

NG only/All is selectable*5

FTP/SFTP data transfer (FTP/SFTP client function)

4 conditionsAll / Total status result (OK/NG) / Result for each tool (OK/(NG and ALM)) is selectable, bmp/jpeg/txt is selectable, FTP/SFTP server

Ethernet

100BASE-TX/10BASE-T*6, RJ45 8-pin connector*6

Interface compatibility

CC-Link / DeviceNet® / EtherNet/IP™ / EtherCATⓇ / RS-232C / BCD / PROFINET / PROFIBUS / TCP/IP output*7

Number of connectible units

Communication units (DL) : 1, Expansion units: 1, Main units: 1

Ratings

24 VDC ±10 % (including ripple), Max. 1.9 A or less (With main unit only: 0.8 A or less, With unit expansion: 1.9 A or less) (Excluding output load)*8

Environmental resistance

0 to +50°C 32 to 122°F (No freezing), 35 to 85 % RH (No condensation)

material

Main unit case: PC/Power connector: PA, PA/Ethernet connector: Copper alloy + Ni plating/Rear heat sink: Aluminum/Main unit rear DIN rail fixing tab: POM/Nameplate: PC, POM/Analog output connector: PA, POM/I/O connector: PA/Head connector: Zinc + Ni plating

Weight

Approx. 210 g

Brand

Keyence

Description

Keyence IX-1000 Image-Based Laser Sensor Enhances Efficiency and Accuracy

The Keyence IX-1000 Image-Based Laser Sensor offers height detection, thickness calculation, and position adjustment capabilities, ensuring precise measurements and reliable performance in various applications. With a wide range of tools available for detection and adjustment, users can optimize their processes and improve overall productivity. The sensor’s statistical information and detection record features provide valuable insights for quality control and process optimization.

Enhance Accuracy: The sensor’s advanced tools and calculation capabilities ensure accurate measurements for improved product quality.
Boost Efficiency: With multiple detection settings and tools, users can streamline processes and increase operational efficiency.
Gain Valuable Insights: Utilize the statistical information and detection record to analyze performance trends and make informed decisions for process improvement.

The Keyence IX-1000 Image-Based Laser Sensor is designed for ease of use and seamless integration into existing systems, offering compatibility with various interfaces and communication units. Its robust environmental resistance ensures reliable performance even in challenging operating conditions. Overall, this sensor is a valuable tool for industries seeking to optimize their processes and achieve higher levels of efficiency and quality control.