| Model |
GL-R10L
|
| Detection capability |
ø1.77" ø45 mm
|
| Total length |
15.75" 400mm
|
| No. of beam |
10
|
| Detection height |
14.17" 360mm
|
| Protection height |
17.52" 445mm
|
| Beam axis spacing/Lens diameter |
40 mm / ø5 1.57" / ø0.20"
|
| Detecting Distance |
0.66 to 49.21' 0.2 to 15 m*1
|
| Effective aperture angle |
Max. ±2.5° (When operating distance is 9.84' 3 m or more)
|
| Light Source |
Infrared LED (870 nm)
|
| Response time (OSSD) (ms) |
48.7*2, 6.6, 63.1*3, 49.3*2, 64.9*3, 7
|
| Detection mode |
Turns on when no interruptions are present in the detection zone
|
| Synchronization between the transmitter and receiver |
Optical synchronization or Wire synchronization (Determined by wiring)
|
| Light interference prevention function |
Prevents mutual interference in up to two GL-R systems.Optical synchronization: prevented by Channel A and B with setting switchWire synchronization: prevented automatically
|
| Control output (OSSD output) |
2 transistor outputs. (PNP or NPN is determined by the cable type), 2.2 µF, 500 mA*4, Max. 2.0 V (with a cable length of 16.40' 5 m), Max. 2.5 V (with a cable length of 16.40' 5 m), Max. 2.5 Ω, Max. 200 µA
|
| Supplemental output (Non-safety-related output) |
1 to 5.5 W)LED lamp (load current: 10 to 230 mA) can be connected., Incandescent lamp (24 VDC, Residual voltage: Max. 2.5 V (with a cable length of 16.40' 5 m), transistor outputs. (PNP or NPN is determined by the cable type)Load current: Max. 50 mA
|
| External input |
ON voltage: 0 to 3 VOFF voltage: Open or 10 V or moreUp to the power voltageShort circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only), ON voltage: 10 to 30 VOFF voltage: Open or 0 to 3 VShort circuit current: Approx. 2.5 mA (Approx. 10 mA with EDM input only)
|
| Power supply |
class 2, 24 VDC ±20%, 43, 69, ripple (P-P) 10% or less
|
| Protection Circuit |
Reverse current protection, Short-circuit protection for each output, Surge protection for each output
|
| Approved standards |
EN55011 ClassA, EN61496-1, EN61496-2, EN61508 (SIL3), EN62061 (SIL CL3)EN ISO13849-1:2015 (Category 4, FCC Part15B ClassA, ICES-003 ClassA, IEC61496-1, IEC62061, PLe)UL508UL1998, UL61496-1, UL61496-1 (Type 4 ESPE)IEC61496-2, UL61496-2 (Type 4 AOPD)IEC61508
|
| Environmental resistance |
IP65/IP67 (IEC60529), Y, -10 to +55 °C 14 to 131 °F (No freezing), -25 to +60 °C -13 to 140 °F (No freezing), 000 lux or less, 000 lux or less., 000 times in each of the X, 1, 10 to 55 Hz, 100 m/s2 (approx. 10 G), 15 to 85 % RH (No condensation), 15 to 95 % RH, 16 ms pulse, 20 sweeps in each of the X, and Z directions, Double amplitude 0.7 mm 0.03", II, Incandescent lamp: 3, Sunlight: 20
|
| material |
Aluminum, Nylon (GF 30%), Polycarbonate, SUS304
|
| Weight |
550 g
|
| Brand |
Keyence
|
![Keyence GL-R10L [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r10l-industify-1.jpg "Keyence GL-R10L [urunkategori] - industify.com")
![Keyence GL-R12H [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r12h-industify-1.jpg)
![Keyence GL-R127F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r127f-industify-1.jpg)
![Keyence GL-R20L [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r20l-industify-1.jpg)
![Keyence GL-R175F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r175f-industify-1.jpg)
![Keyence GL-R119F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r119f-industify-1.jpg)
![Keyence GL-R04L [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/gl-r04l-industify-1.jpg)
Reviews
There are no reviews yet.