Name: FD-MZ50ATKP Keyence Non-Wetted Electrode Electromagnetic Flow Sensors | Industify
Brand: Keyence
Price: 1.00 USD
Availability: InStock

Model

FD-MZ50ATKP*1

Type

VERTICAL

Shape

Built-in amplifier

Rated flow range

0.7 – 13.0 G/min (2.5 – 50 L/min)*1

Possible display range

0.7 – 26.4 G/min (2.5 – 100 L/min)*2

Possible ranges to set

0 – 26.4 G/min (0 – 100 L/min)

Connection port

NPT3/4 (20 A)

Detectable fluids

Water or non-corrosive liquid

Conductivity of detection fluids

5 µS/cm or higher

Detection fluid temperature

0 to +85°C 32 to 185 °F (No freezing)

Pressure loss

Max. 1.45 PSI (0.01 MPa)

Display method

7 segment LED, bar display (2 colors), dual row display with 4-digit, flow indicator, output indicators

Display Resolution

0.1/1 (G/min, L/min) selectable

Repeatability

0.5 s : ±5% of F.S., 1 s : ±3.5% of F.S., 10 s : ±1% of F.S., 2.5 s : ±2.5% of F.S., 30 s : ±0.8% of F.S., 5 s : ±1.6% of F.S., 60 s : ±0.6% of F.S.*3

Hysteresis

Variable

Response time (chatter prevention feature)

0.5 s/1 s/2.5 s/5 s/10 s/30 s/60 s variable

Accumulated flow unit

0.1/1/10/100/1000 (G, L) selectable

Integration data storage cycle

Save to memory every 10 seconds

Memory backup

Data read/write frequency : 1 million times or more), EEPROM (Data storage length : 10 years or longer

Control output/Accumulation pulse output/ Error alarm output

3 outputs (N.O./N.C. switchable), max. 100 mA/ch*4 30 V or less, PNP open collector, residual voltage 1 V or less

Analog output

4-20 mA, max. load resistance 260 Ω Analog output range can be set to any value

Integration reset/bank switch input/flow zero function input

Input time : 20 ms or greater, Select either the accumulation output or the accumulation pulse by setting the mode

Minimum flow volume

0.7 G/min (2.5 L/min)*5

Power consumption (Current consumption)

Normal : 1700 mW (70 mA), Power save : 1000 mW (40 mA)

Rating

24 VDC, Class 2, Ripple (P-P) 10 % or less

Environmental resistance

Y, 0 to +50 °C 32 to 122 °F (No freezing), 10 to 55 Hz, 2 hours in each of the X, 290 PSI (2.0 MPa), 35 to 85 % RH (No condensation), and Z directions, Double amplitude 1.5 mm 0.06", IP65, Max. 145 PSI (1.0 MPa)

material

Bore : SCS13, Cable : PVC, Measurement pipe : PPS, Metal case areas : SUS430, O ring : fluoro-rubber (FKM), Plastic case areas : PPS

Accessory

Connector cable (2.7 m 106.3"), Instruction Manual

Weight

130 g, Approx. 1

Brand

Keyence

Description

Enhance Flow Control with Keyence Non-Wetted Electrode Electromagnetic Flow Sensors

Optimize Performance: The Keyence FD-MZ50ATKP sensor boasts a wide flow range and precise readings to ensure accurate measurement and monitoring of fluid flow. With minimal pressure loss and quick response times, users can rely on real-time data to enhance flow control efficiency.

Easy Integration: Built-in amplifier and versatile connection options make installation seamless, while the user-friendly dual-row display provides clear output indicators and easy-to-read data. Integration reset and flow zero function inputs allow for convenient customization and control over flow rates.

Facilitate Robust Data Management:

Save integration data every 10 seconds with long-term storage capabilities, ensuring vital flow information is securely retained.
Minimize Downtime:
With durable materials and high environmental resistance, this sensor offers reliable performance even in challenging conditions, reducing maintenance needs and prolonging operational longevity.