| Model |
FD-H32K
|
| Type |
High-temperature model
|
| Supported pipe diameter |
1" (25A), ø28–37 ø1.10"-1.46"1 1/4" (32A), ø37–44 ø1.46"-1.73"
|
| Supported pipe materials |
hard plastic piping*1, Metal piping
|
| Supported fluids |
All fluids (water, chemicals, etc.)*1, oil
|
| Supported fluid temperature |
0–180°C 32–356°F (no freezing on pipe surface)*2*3
|
| Maximum rated flow |
1" (25A) : 200 L/min 52.8 gal/min1 1/4" (32A) : 300 L/min 79.3 gal/min
|
| Zero cut flow rate |
initial value), 1.0 L/min 0.3 gal/min (variable
|
| Detection principle |
Delta TOF + Pulse Doppler
|
| Function for automatic correction for speed of sound in liquid |
Yes
|
| Display |
QVGA 2.0 model: color LCD, status indicator light
|
| Display update cycle |
Approx. 10 times/second
|
| Display Resolution |
0.01/0.1/1 (L) (default value: 1; up to 8 digits), 0.01/0.1/1 (L/min) (default value: 1)
|
| Response Time |
0.5 s / 1.0 s / 2.5 s / 5.0 s / 10.0 s / 30.0 s / 60.0 s / 120.0 s / 200.0 s
|
| Measurement accuracy |
Between 10 and 100% of F.S.: ±3.0% of RD*4*5Between 0 and 10% of F.S.: ±0.3% of F.S.*4*5
|
| Repeatability |
0.5 s: ±1.0%, 1 s: ±0.7%, 10 s: ±0.2%, 2.5 s: ±0.45%, 30 s: ±0.15%, 5 s: ±0.3%, 60 s: ±0.1% of F.S.*4*6
|
| Hysteresis |
Variable
|
| Flow units |
L/min m3/h G/min
|
| Pulse output increments (L) |
0.02–999.99
|
| Pipe temperature measurement accuracy |
—
|
| Network support |
IO-Link*7
|
| Heat calculation function |
0.02–999.99*8, Instantaneous value (MJ/h): 0.01/0.1/1 (default value 0.1); Integrated value (MJ): 0.01/0.1/1 (default value 0.1)*8, MJ/h kW kBTU/h*8
|
| Data accumulation |
Approx. 1 year, USB2.0
|
| Power I/O connector |
M12 8-pin connector (male)
|
| I/O (switchable) |
4–20 mA/0–20 mA (switchable), Instantaneous flow mode / area mode / pulse output mode / integrated flow mode / bubble detection mode / error outputNPN/PNP setting switching, Integrated reset input / flow-rate zero input / zero-point adjustment input / bank inputShort circuit current: 1.5 mA or less; input time: 20 ms or more, load resistance 500 Ω or less, max. 100 mA/Ch or less, open collector output 30 VDC or less, residual voltage 2.5 V or less
|
| Power supply |
20–30 VDC, 240 mA or less (when using flow sensor standalone; with analog output; excluding load current)*9, Class 2/LPS, ripple (P-P) 10% included
|
| Protection Circuit |
Protection against reverse power connection, and output surges, output short circuits, power supply surges
|
| Environmental resistance |
Y and Z axes, 10–500 Hz; Power spectral density: 0.816 G2/Hz; X, 100 m/s2 (approx. 10 G), 1000 times each for X, 16 ms pulses, 35–85% RH (no condensation), IP65/67 (IEC 60529)*10, Sensor head: −20 to +60°C –4 to +140°F (no freezing); Display unit: −20 to +50°C –4 to +122°F (no freezing)*2, Y and Z directions
|
| material |
Body: PEEK/PPS/PET/PAR/SUS304Sensor element: special rubber; Mounting bracket: SUS304/SUSXM7, Body: PPS/PET/POM; Display window: PAR
|
| Weight |
approx. 680 g 23.99 oz
|
| Brand |
Keyence
|
![Keyence FD-H32K [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h32k-industify-1.jpg "Keyence FD-H32K [urunkategori] - industify.com")
![Keyence FD-H10K [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h10k-industify-1.jpg)
![Keyence FI-C40F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-c40f-industify-1.jpg)
![Keyence FI-T100 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fi-t100-industify-1.jpg)
![Keyence FD-H32F [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-h32f-industify-1.jpg)
![Keyence OP-86941 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/op-86941-industify-1.jpg)
![Keyence FD-HCC0 [urunkategori] - industify.com](https://industify.com/wp-content/uploads/product-photos/fd-hcc0-industify-1.jpg)
Reviews
There are no reviews yet.